AT89LP51ED2-20AU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | 89LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT89LP51ED2 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | 2-Wire, EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 40 |
| RAM Size | 2.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 8051 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16 |
| EEPROM Size | 4K x 8 |
| Number of Programmable I/O | 36 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
AT89LP51ED2-20AU Overview
Due to its space-saving qualities, it is available in the 44-TQFP package. Surface Mount is used for mounting. This item can be found in package Tray. 8051 core processor is present on the device. During work, the temperature should remain at -40°C~85°C TA. There is FLASH program memory in it. There are 40 I/Os on it. A component with the same part number as AT89LP51ED2 can be compared to other similar components. The terminals of this device are set to QUAD. As far as terminations are concerned, there are 44 terminations present. In the 89LP series, this electrical component is found. The supply voltage of 3V allows for high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. It is constructed using 44 pins. The mounting of this device is carried out following the method of Surface Mount. This component is a part of Microcontrollers. Memory size for the devices is 64kB, which can be used to store programs and data. There is a maximum current supply of 7mA. Power is provided by a 2.5/5V source. The system is highly efficient when working at a frequency of 20MHz. A total of 3 timers/counters have been set up. 36 is the number of programmable I/O. Normally, the supply voltage (Vsup) should remain above 2.4V. It works with an oscillator type Internal.
AT89LP51ED2-20AU Features
44-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
AT89LP51ED2-20AU Applications
There are a lot of Microchip Technology AT89LP51ED2-20AU Microcontroller applications.
- Industrial robot
- Fire detection & safety devices
- Home video and audio
- ECG machine
- Petrochemical
- Magnetic resonance imaging (MRI)
- Auto-breaking system
- Set-top boxes
- Volt meter
- Speed meter
