AT89LP51IC2-20MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VFQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | 89LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | AT89LP51IC2 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 40 |
| RAM Size | 1.375K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 8051 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
AT89LP51IC2-20MU Overview
Due to its space-saving qualities, it is available in the 44-VFQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. This item can be found in package Tray. It is equipped with a 8051 core processor. When working, the temperature should be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 40 I/Os on the board. Based on the AT89LP51IC2 base part number, it can be compared with other components. The terminals of this device are set to QUAD. Currently, it consists of 44 terminationals. The 89LP series contains this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. It is constructed using 44 pins. According to Surface Mount, it is mounted. In Microcontrollers, this component is included. The devices have a memory size of 32kB that can be used to store programs and data. There is a maximum current supply of 7mA. Power is provided by a source of 2.5/5V. This device achieves excellent efficiency at frequencies of 20MHz. There are currently 3 timers/counters set up on the system. During normal operation, the supply voltage (Vsup) should be kept above 2.4V. There is an oscillator type Internal used in this circuit.
AT89LP51IC2-20MU Features
44-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
AT89LP51IC2-20MU Applications
There are a lot of Microchip Technology AT89LP51IC2-20MU Microcontroller applications.
- Computer/laptop
- Glucose monitoring systems (for Type 1 Diabetes)
- Gas monitoring systems
- Nintendo
- Laminators
- Xbox
- Digital set-top boxes
- Food and beverage
- Air fryers
- Playstation
