AT89LP51ID2-20JU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 89LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3V |
| Terminal Pitch | 1.27mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT89LP51ID2 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | 2-Wire, EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 40 |
| RAM Size | 2.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 8051 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16 |
| EEPROM Size | 4K x 8 |
| Number of Programmable I/O | 36 |
| Height Seated (Max) | 4.572mm |
| Length | 16.586mm |
| RoHS Status | ROHS3 Compliant |
AT89LP51ID2-20JU Overview
To save space, it is included in the 44-LCC (J-Lead) package. A Surface Mount mounting method is used. In the package Tube, it is included. With a processor of 8051 cores, the device is powered. Maintain a temperature of -40°C~85°C TA while working. FLASH is its program memory type. A total of 40 I/Os are available on this device. A component with the same part number as AT89LP51ID2 can be compared to other similar components. A QUAD position is assigned to its terminals. 44 terminations are present in it. The 89LP series contains this electrical component. Using the 3V supply voltage allows for high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. A total of 44 pins are used in its construction. During the mounting process, the device is mounted based on the Surface Mount method. Subcategory Microcontrollers includes this component. The devices have a memory size of 64kB that can be used to store programs and data. Supply current is maximum at 7mA. Power comes from a source of 2.5/5V. The system is highly efficient when working at a frequency of 20MHz. 3 timer/counters are present. The number of programmable inputs and outputs is 36. Vsup should be kept above 2.4V for normal operation. Using oscillator type Internal makes it work.
AT89LP51ID2-20JU Features
44-LCC (J-Lead) package
Mounting type of Surface Mount
Microcontrollers subcategory
AT89LP51ID2-20JU Applications
There are a lot of Microchip Technology AT89LP51ID2-20JU Microcontroller applications.
- Missile control
- Ipad
- Heart rate monitors
- Virtual reality VR robots
- Traditional industrial transformation
- Removable disks
- Aerospace navigation systems
- Industrial instrumentation devices
- Dryers
- Graphic terminals
