AT89LP51ID2-20MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VFQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | 89LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | AT89LP51ID2 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | 2-Wire, EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 40 |
| RAM Size | 2.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 8051 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16 |
| EEPROM Size | 4K x 8 |
| Number of Programmable I/O | 36 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
AT89LP51ID2-20MU Overview
To save space, it is included in the 44-VFQFN Exposed Pad package. Using Surface Mount, it is mounted. A package of Tray contains it. Device with 8051 core processor issupported. Work should be performed at a temperature of -40°C~85°C TA. It has a type of program memory of FLASH. The device has 40 I/Os. To find equivalent components, use its AT89LP51ID2 base part number. QUAD is the position of its terminals on the board. As far as terminations are concerned, there are 44 terminations present. It is a member of the 89LP series of electrical components. Because the supply voltage is 3V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. It is constructed using 44 pins. The mounting of this device is carried out following the method of Surface Mount. The component is included in Microcontrollers. In the device, there is a memory capacity of 64kB which may be used to store programs and data. It is important to note that the maximum supply current is 7mA. Power comes from a source of 2.5/5V. It performs extremely well at a frequency of 20MHz. 3 counters/timers are currently active. A chip with 36 programmable inputs/outputs is available. Normal operation requires a supply voltage (Vsup) that is higher than 2.4V. It works with an oscillator type Internal.
AT89LP51ID2-20MU Features
44-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
AT89LP51ID2-20MU Applications
There are a lot of Microchip Technology AT89LP51ID2-20MU Microcontroller applications.
- Blood pressure monitors
- Embedded gateways
- Dialysis machines (performs function of liver)
- Scanners
- Volt meter
- Industrial instrumentation devices
- Accu-check
- Ipod
- Projectors
- Aerospace navigation systems
