AT89LP51RD2-20MU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-VFQFN Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | 89LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 20MHz |
| Base Part Number | AT89LP51RD2 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | 2-Wire, EBI/EMI, I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 40 |
| RAM Size | 2.25K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.4V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | 8051 |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | EBI/EMI, I2C, SPI, UART/USART |
| Supply Current-Max | 7mA |
| Bit Size | 8 |
| Data Converter | A/D 7x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 8b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16 |
| Number of Programmable I/O | 36 |
| Height Seated (Max) | 1mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT89LP51RD2-20MU Overview
It is available in the 44-VFQFN Exposed Pad package for the benefit of saving space. Surface Mount is used for mounting. It comes in the package?of a Tray. The device runs in 8051 core processor. During work, the temperature should remain at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 40 I/Os on the board. It has a part number of AT89LP51RD2 that can be used to locate similar components. The terminals of this device are set to QUAD. It has 44 terminationals. The 89LP series includes this electrical component. Using the 3V supply voltage allows for high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed with 44 pins. It is mounted based on the method of Surface Mount. This is a component included in Microcontrollers. A device with a memory size of 64kB can store programs and data. The maximum supply current is set at 7mA. Powered by a 2.5/5V source. This device works well at 20MHz frequency when it is operating at a high rate of efficiency. In total, there are 3 timers and counters. There are a total of 36 programmable I/Os available. In order to ensure normal operation, the supply voltage (Vsup) must remain above 2.4V. Using oscillator type Internal makes it work.
AT89LP51RD2-20MU Features
44-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
AT89LP51RD2-20MU Applications
There are a lot of Microchip Technology AT89LP51RD2-20MU Microcontroller applications.
- Robots
- Printers
- Automatic staplers
- Wastewater treatment
- Fire detection & safety devices
- Entertainment products
- Embedded gateways
- Xbox
- Television
- Hard drives
