AT91SAM7XC512B-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TFBGA |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM7XC |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Silver/Copper/Nickel (Sn/Ag/Cu/Ni) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 55MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | AT91SAM7XC512 |
| Interface | CAN, Ethernet, I2C, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 62 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.65V~1.95V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM7® |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16/32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, Ethernet, I2C, SPI, SSC, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 8x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 1 |
| Core Architecture | ARM |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
AT91SAM7XC512B-CU Overview
Due to its space-saving qualities, it is available in the 100-TFBGA package. The way of Surface Mount is used to mount it. You can find it in the package of Tray. ARM7? core processor is present on the device. Work should be done at -40°C~85°C TA. FLASH has been assigned to it as a program memory. 62 I/Os have been provided by the device. It has a part number of AT91SAM7XC512 that can be used to locate similar components. A BOTTOM position is assigned to its terminals. There are a total of 100 terminations in it. This electrical component is part of the SAM7XC series. As a result of the 1.8V supply voltage, high efficiency is possible. MICROCONTROLLER, RISC is this gadget's uPs/uC/peripheral IC. A method of mounting is used, which is Surface Mount. It is possible to store programs and data on the devices, as they have a memory size of 512kB. The core architecture of the system is ARM. This device works well at 55MHz frequency when it is operating at a high rate of efficiency. In total, there are 1 timers and counters. There is an oscillator type Internal used in this circuit.
AT91SAM7XC512B-CU Features
100-TFBGA package
Mounting type of Surface Mount
AT91SAM7XC512B-CU Applications
There are a lot of Microchip Technology AT91SAM7XC512B-CU Microcontroller applications.
- Glucose monitoring systems (for Type 1 Diabetes)
- Mice
- Instrument control
- DCS control intelligent sensor
- Traditional industrial transformation
- Smartphones-calling, video calling, texting, email
- Calculators
- Tape drives
- Oil and gas
- Coffee machines
