AT91SAM9260B-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 217-LFBGA |
| Number of Pins | 217 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | AT91SAM |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 217 |
| Termination | SMD/SMT |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 180MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | AT91SAM9260 |
| Interface | 2-Wire, EBI/EMI, Ethernet, I2C, MMC, SPI, UART, USART, USB |
| Max Supply Voltage | 1.95V |
| Min Supply Voltage | 1.65V |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 96 |
| RAM Size | 8kB |
| Memory Type | FLASH, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | POR, WDT |
| Bit Size | 32 |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of ADC Channels | 4 |
| Ethernet | 10/100Mbps |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM, SRAM |
| USB | USB 2.0 (2) |
| Additional Interfaces | EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART |
| Number of PWM Channels | 2 |
| Number of Ethernet Channels | 1 |
| Height | 900μm |
| Length | 15mm |
| Width | 15.05mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT91SAM9260B-CU Overview
Due to its 217-LFBGA packaging, it is convenient to ship overseas. High reliability is achieved with advanced packaging method Tray. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Be aware of the operating temperature around -40°C~85°C TA. The AT91SAM series contains it. This CPU is cored with a ARM926EJ-S processor. It has SDRAM, SRAM RAM controllers. This microprocessor has EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces to serve you better. I/O is run at 1.8V 2.5V 3.3V on this CPU. In terms of uPs and uCs as well as peripheral ICs, this is a MICROCONTROLLER, RISC. To find variants of the microprocessor, try searching with AT91SAM9260. There are 217 terminations totally. Using a 1.8V voltage supply, the microprocessor should turn on and run. It is an architecture with 32 bits. 180MHz Hz is the frequency at which the CPU operates. To learn about the functions of the pins 217 please refer to their datasheets. This microprocessor is a typical Microcontrollers. The size of data Bus of the CPU is based on 32b-bit system. This CPU is widely used in many applications because of its Surface Mount mount. There is 8kB RAM (Random Access Memory) built in. Users should not supply a microprocessor with more voltage than 1.95V under normalcircumstances. A voltage of 1.65V is recommended for feeding the embedded microprocessor. Programs on the CPU transfer data through 96 I/Os. Memory size on the CPU is 32kB. A CPU's 6 counters indicate how busy it is. The CPU is connected to POR, WDT peripheral devices.
AT91SAM9260B-CU Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
96 I/Os
POR, WDT Peripherals
AT91SAM9260B-CU Applications
There are a lot of Microchip Technology AT91SAM9260B-CU Microprocessor applications.
- Torpedo guidance
- Missile control
- Wastewater treatment
- Electromechanical control
- Teletext terminals
- Paper shredders
- Heart rate monitors
- Toys
- Television
- Virtual reality VR robots
