AT91SAM9260B-CU-999
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 217-LFBGA |
| Number of Pins | 217 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | AT91SAM |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 217 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 80MHz |
| Base Part Number | AT91SAM9260 |
| Operating Supply Voltage | 3.3V |
| Interface | 2-Wire, CAN, EBI/EMI, Ethernet, I2C, I2S, MMC, SPI, UART, USART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 96 |
| Speed | 210 MHz |
| RAM Size | 8kB |
| Memory Type | FLASH, ROM |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Bit Size | 32 |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 6 |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Ethernet | 10/100Mbps |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM, SRAM |
| USB | USB 2.0 (2) |
| Additional Interfaces | EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART |
| Height Seated (Max) | 1.4mm |
| Length | 15mm |
| RoHS Status | ROHS3 Compliant |
AT91SAM9260B-CU-999 Overview
Since the microprocessor is packed in 217-LFBGA, shipping overseas is convenient. In order to provide high reliability, advanced packaging method Tape & Reel (TR) is used. A CPU with 1 Core 32-Bit cores and width 1 Core 32-Bit busses is used. Understand the operating temperature around -40°C~85°C TA. The AT91SAM series contains it. ARM926EJ-S processors are embedded in this CPU. Memory controllers for this CPU are SDRAM, SRAM. Featuring EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces, this microprocessor can better serve you. The CPU runs at 1.8V 2.5V 3.3V when it comes to I/O. I would rate this as a MICROCONTROLLER, RISC for the uPs/uCs/Peripheral ICs type. To find variants of the microprocessor, try searching with AT91SAM9260. To date, there have been 217 terminations. When the voltage supply is 1.8V, the cpu microprocessor should be powered on and run. This microprocessor has an architecture of 32 bits. A CPU operates at a frequency of 80MHz. Please refer to the datasheets for 217 pins functions. Microcontrollers is a typical embedded microprocessor. Generally, data transfer takes place at a rate of 32b bandwidth. In many applications, this CPU is mounted with a Surface Mount bus. From 3.3V onwards, the CPU microprocessor can operate. Random-Access Memory (RAM) is designed with an amount of 8kB KB. A voltage greater than 3.6V should not normally be applied to the embedded microprocessor. 1.65V should be the lowest voltage fed to the CPU microprocessor. 96 I/Os are used by CPU programs to transfer data. Its memory size is 32kB. An example of a 6 counter can be found here. The CPU is connected to Brown-out Detect/Reset, DMA, POR, PWM, WDT peripheral devices.
AT91SAM9260B-CU-999 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
8kB RAM
96 I/Os
Brown-out Detect/Reset, DMA, POR, PWM, WDT Peripherals
AT91SAM9260B-CU-999 Applications
There are a lot of Microchip Technology AT91SAM9260B-CU-999 Microprocessor applications.
- Toasters
- Walkie talkies
- Embedded gateways
- Fabric
- Blood pressure monitors
- Day to day life field
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- X-ray
- Mice
- Routers
