AT91SAM9G10-CU
| Parameters | |
|---|---|
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.08V |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 96 |
| RAM Size | 16kB |
| Memory Type | ROM |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | DMA, LCD, POR, PWM, WDT |
| Bit Size | 32 |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.3V |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM, SRAM |
| USB | USB 2.0 (2) |
| Additional Interfaces | EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART |
| ROM Programmability | FLASH |
| Number of PWM Channels | 2 |
| Number of I2C Channels | 1 |
| Display & Interface Controllers | LCD |
| Height | 1.05mm |
| Length | 15mm |
| Width | 15mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 217-LFBGA |
| Number of Pins | 217 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | SAM9G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 217 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 266MHz |
| Base Part Number | AT91SAM9G10 |
| Operating Supply Voltage | 1.2V |
| Interface | EBI/EMI, I2C, IrDA, MMC, SPI, Serial, UART, USART, USB |
AT91SAM9G10-CU Overview
Due to its 217-LFBGA packaging, it is convenient to ship overseas. High reliability is achieved using advanced packaging method Tray. CPUs have 1 Core 32-Bit cores/bus width. Extended operating temperature around -40°C~85°C TA. A SAM9G series item. A ARM926EJ-S processor is present in this CPU. There are SDRAM, SRAM RAM controllers on this CPU. Microprocessors with EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces are designed to serve users better. This CPU runs I/O at 1.8V 3.3V. A MICROCONTROLLER, RISC represents the uPs/uCs/Peripheral ICs type. Use AT91SAM9G10 to search for variants of the cpu microprocessor. To date, there have been 217 terminations. Turn on the cpu microprocessor and let it run with a 1.2V voltage supply. There is a 32-Bit architecture in it. CPUs operate at 266MHz Hz. Datasheets for 217 pin functions can be found here. An example of a Microprocessors embedded microprocessor. Data can be transferred over 32b bandwidths. There are many applications for this CPU, since it is Surface Mount mounted. It is possible to use the micro processor from 1.2V. In general, RAM (Random-Access Memory) is designed with a 16kB of 0MB. It is generally recommended that users do not supply their embedded microprocessors with voltages higher than 3.6V. It is recommended that the lowest voltage be fed to the micro processor is 1.08V. 96 I/Os are used by CPU programs to transfer data. A CPU has memory sized 32kB. To determine the CPU's efficiency, 4 counters are used. The CPU is connected to DMA, LCD, POR, PWM, WDT peripheral devices.
AT91SAM9G10-CU Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
16kB RAM
96 I/Os
DMA, LCD, POR, PWM, WDT Peripherals
AT91SAM9G10-CU Applications
There are a lot of Microchip Technology AT91SAM9G10-CU Microprocessor applications.
- Petrochemical
- Dryers
- Calculator
- Tape drives
- Guidance-GPS
- Virtual reality VR robots
- Computer/laptop
- Removable disks
- Nintendo
- Data acquisition and control
