AT91SAM9G25-CFU-999
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 247-LFBGA |
| Surface Mount | YES |
| Number of Pins | 247 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2004 |
| Series | SAM9G |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 247 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Base Part Number | AT91SAM9G25 |
| Interface | EBI/EMI, Ethernet, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Max Supply Voltage | 1.1V |
| Min Supply Voltage | 900mV |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 105 |
| RAM Size | 32kB |
| Memory Type | ROM |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | DMA, POR, PWM, WDT |
| Bit Size | 32 |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 6 |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| External Data Bus Width | 32 |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, SDRAM, SRAM |
| USB | USB 2.0 (3) |
| Additional Interfaces | EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART |
| ROM Programmability | FLASH |
| Height Seated (Max) | 1.37mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
AT91SAM9G25-CFU-999 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 247-LFBGA. Using advanced packaging techniques Cut Tape (CT), high reliability is ensured. 1 Core 32-Bit cores/Bus width are present in the CPU. K-40°C~85°C TAw what the operating temperature is around -40°C~85°C TA. It comes from the SAM9G series. The CPU is powered by a ARM926EJ-S core. There are DDR2, SDRAM, SRAM RAM controllers used by this CPU. To serve better this microprocessor features EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces. There is 1.8V 3.3V I/O running on this CPU. The type MICROCONTROLLER, RISC belongs to uPs/uCs/Peripheral ICs. If you are looking for variants of the cpu microprocessor, try search with AT91SAM9G25. Total terminations are 247. A 1V voltage supply should be used to turn on and run the cpu microprocessor. In terms of architecture, it is a 32-Bit system. The CPU operates at a frequency of 400MHz. Detailed functions for 247 pins can be found in the datasheets. Its external data bus width is 32. It is designed to have RAM (Random-Access Memory) of 32kB. A voltage greater than 1.1V should not normally be applied to the embedded microprocessor. The lowest voltage fed to the CPU microprocessor should be 900mV. CPU programs transfer data via 105 I/Os. Its memory size is 64kB. An example of a 6 counter can be found here. The CPU is connected to DMA, POR, PWM, WDT peripheral devices.
AT91SAM9G25-CFU-999 Features
ARM926EJ-S Core
32-Bit Structure
32kB RAM
105 I/Os
DMA, POR, PWM, WDT Peripherals
AT91SAM9G25-CFU-999 Applications
There are a lot of Microchip Technology AT91SAM9G25-CFU-999 Microprocessor applications.
- Wastewater treatment
- Fabric
- PDAs, game consoles
- Nintendo
- DCS control intelligent sensor
- Copiers
- Answering machines
- Equipment control
- Current meter
- Food and beverage
