AT91SAM9G25-CU-999
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 217-LFBGA |
| Surface Mount | YES |
| Number of Pins | 217 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2004 |
| Series | SAM9G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 217 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Base Part Number | AT91SAM9G25 |
| Interface | EBI/EMI, Ethernet, I2C, IrDA, LIN, MMC, SPI, UART, USART, USB |
| Max Supply Voltage | 1.1V |
| Min Supply Voltage | 900mV |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 105 |
| RAM Size | 32kB |
| Memory Type | ROM |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | DMA, POR, PWM, WDT |
| Bit Size | 32 |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Address Bus Width | 26 |
| ROM (words) | 65536 |
| Core Architecture | ARM |
| On Chip Program ROM Width | 8 |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, SDRAM, SRAM |
| USB | USB 2.0 (3) |
| Additional Interfaces | EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART |
| ROM Programmability | FLASH |
| Height Seated (Max) | 1.4mm |
| Length | 15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT91SAM9G25-CU-999 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 217-LFBGA. High reliability is achieved by using advanced packaging methods Cut Tape (CT). Cores/Bus width of the CPU is 1 Core 32-Bit . It is important to understand the operating temperature around -40°C~85°C TA. A SAM9G series item. The CPU is powered by a ARM926EJ-S core. A total of DDR2, SDRAM, SRAM RAM controllers are used by this CPU. This microprocessor features EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces to better serve its users. 1.8V 3.3V is the CPU's I/O address. I would rate this as a MICROCONTROLLER, RISC for the uPs/uCs/Peripheral ICs type. Using AT91SAM9G25 will help you find variants of the cpu microprocessor. In total, there are 217 terminations. Turn on the cpu microprocessor and let it run with a 1V voltage supply. 32-Bit is its architecture. The CPU operates at a frequency of 400MHz. For functions of 217 pins, please refer to the datasheets. It is important to note that there is 32b bandwidth available for data transfer. It is designed with 0 RAM (Random-Access Memory). Users should not supply a microprocessor with more voltage than 1.1V under normalcircumstances. There should be 900mV voltage applied to the CPU microprocessor below 900mV. A CPU program transfers data by using 105 I/Os. 64kB is the size of the CPU's memory. There are DMA, POR, PWM, WDT peripheral devices connected to the CPU.
AT91SAM9G25-CU-999 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
32kB RAM
105 I/Os
DMA, POR, PWM, WDT Peripherals
AT91SAM9G25-CU-999 Applications
There are a lot of Microchip Technology AT91SAM9G25-CU-999 Microprocessor applications.
- Mice
- Copiers
- Equipment control
- Current meter
- Measurement and control field
- Switches
- Radio
- Data acquisition and control
- Projector
- Automatic control
