AT91SAM9G35-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | 217-LFBGA |
| Number of Pins | 217 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | SAM9G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 217 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Base Part Number | AT91SAM9G35 |
| Power Supplies | 11.8/3.33.3V |
| Interface | 2-Wire, EBI/EMI, Ethernet, I2C, IrDA, LIN, MMC, SPI, UART, USART, USB |
| Max Supply Voltage | 1.1V |
| Min Supply Voltage | 900mV |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 105 |
| RAM Size | 32kB |
| Memory Type | FLASH, ROM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | DMA, LCD, POR, PWM, WDT |
| Bit Size | 32 |
| Watchdog Timer | Yes |
| Data Bus Width | 32b |
| Number of Timers/Counters | 6 |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, SDRAM, SRAM |
| USB | USB 2.0 (3) |
| Additional Interfaces | EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART |
| Number of PWM Channels | 4 |
| Display & Interface Controllers | LCD, Touchscreen |
| Length | 15mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT91SAM9G35-CU Overview
Packed in 217-LFBGA, the microprocessor is convenient for shipping overseas. High reliability is achieved with advanced packaging method Tray. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. It is important to understand the operating temperature around -40°C~85°C TA. The cpu microprocessor belongs to the SAM9G series. A ARM926EJ-S processor powers this CPU. It has DDR2, SDRAM, SRAM RAM controllers. To serve better this microprocessor features EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces. This CPU runs I/O at 1.8V 3.3V. This is a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. Use AT91SAM9G35 when searching for variants of the embedded microprocessor. There are 217 terminations totally. You should be able to turn on and run the embedded microprocessor with a voltage supply of 1V. This microprocessor has an architecture of 32 bits. A 400MHz frequency is used by the CPU. 217 pin functions are described in the datasheets. The cpu microprocessor Microprocessors is typical. To transfer data, there are 32b bandwidths available. This CPU is widely used in a variety of applications with its Surface Mount mounting. In the datasheet, 11.8/3.33.3V power supplies are required for this embedded microprocessor. There is 32kB RAM (Random Access Memory). Users should not supply the embedded microprocessor with voltages higher than 1.1V in normalcircumstances. 900mV should be the lowest voltage fed to the CPU microprocessor. Programs on the CPU transfer data through 105 I/Os. The CPU has memory sized 64kB. It is possible to tell how busy the CPU is by using 6 counters. A total of DMA, LCD, POR, PWM, WDT peripheral devices are connected to the CPU.
AT91SAM9G35-CU Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
32kB RAM
105 I/Os
DMA, LCD, POR, PWM, WDT Peripherals
AT91SAM9G35-CU Applications
There are a lot of Microchip Technology AT91SAM9G35-CU Microprocessor applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Leakage current tester
- Industrial control field
- Traditional industrial transformation
- Electronic jamming systems
- Paper shredders
- Measurement and control field
- Washing machine
- Routers
- Projector
