AT91SAM9G35-CU-999
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | 217-LFBGA |
| Number of Pins | 217 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | SAM9G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 217 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Base Part Number | AT91SAM9G35 |
| Power Supplies | 11.8/3.33.3V |
| Interface | 2-Wire, EBI/EMI, Ethernet, I2C, IrDA, LIN, MMC, SPI, UART, USART, USB |
| Max Supply Voltage | 1.1V |
| Min Supply Voltage | 900mV |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 105 |
| RAM Size | 32kB |
| Memory Type | ROM, ROMless |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | DMA, LCD, POR, PWM, WDT |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DDR2, SDRAM, SRAM |
| USB | USB 2.0 (3) |
| Additional Interfaces | EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART |
| Display & Interface Controllers | LCD, Touchscreen |
| Height Seated (Max) | 1.4mm |
| Length | 15mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT91SAM9G35-CU-999 Overview
Shipping overseas is convenient since the embedded microprocessor is packed in 217-LFBGA. A high level of reliability is provided by using an advanced packaging method Tape & Reel (TR). In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. K-40°C~85°C TAw what the operating temperature is around -40°C~85°C TA. A SAM9G series item. ARM926EJ-S is the processor core of this CPU. A CPU with this architecture uses DDR2, SDRAM, SRAM RAM controllers. With its EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces, this microprocessor will be able to serve you better. I/O is run at 1.8V 3.3V on this CPU. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. Use AT91SAM9G35 when searching for variants of the embedded microprocessor. As a whole, there are 217 terminations. With a 1V voltage supply, the part should be turned on and run. There are 32 bits in its architecture. 400MHz Hz is the frequency at which the CPU operates. You can refer to the datasheets for the functions of 217 pins. As a Microprocessors, this cpu microprocessor is typical. For data transfer, there is 32b bandwidth available. In many applications, this CPU is mounted with a Surface Mount bus. As specified in datasheets, the embedded microprocessor requires 11.8/3.33.3V power supplies. RAM (Random Access Memory) is designed to be 32kB. It is generally recommended that users do not supply their embedded microprocessors with voltages higher than 1.1V. It is recommended that the lowest voltage be fed to the micro processor is 900mV. The CPU programs, transfers data by 105 I/Os. 64kB is the size of the CPU's memory. Counters 2 indicate how busy the CPU is. The CPU is connected to DMA, LCD, POR, PWM, WDT peripheral devices.
AT91SAM9G35-CU-999 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
32kB RAM
105 I/Os
DMA, LCD, POR, PWM, WDT Peripherals
AT91SAM9G35-CU-999 Applications
There are a lot of Microchip Technology AT91SAM9G35-CU-999 Microprocessor applications.
- Keyboards
- Light sensing & controlling devices
- Mice
- Entertainment-radios, CD players, televisions
- Calculator
- Security systems
- Volt meter
- Guidance-GPS
- Heart rate monitors
- ECG machine
