AT91SAM9G45C-CU-999

ARM926EJ-S 32-bit Microprocessor SAM9G Series AT91SAM9G45 324-Pin 400MHz 1V 324-TFBGA

Manufacturer: Microchip Technology
Nocochips NO: 536-AT91SAM9G45C-CU-999
Package: 324-TFBGA
Datasheet: PDF
Stock: 321
Description: ARM926EJ-S 32-bit Microprocessor SAM9G Series AT91SAM9G45 324-Pin 400MHz 1V 324-TFBGA (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Contact Plating	Copper, Silver, Tin
Mount	Surface Mount
Package / Case	324-TFBGA
Number of Pins	324
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
Published	2010
Series	SAM9G
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	324
Subcategory	Microcontrollers
Technology	CMOS
Terminal Position	BOTTOM
Terminal Form	BALL
Supply Voltage	1V
Frequency	400MHz
Base Part Number	AT91SAM9G45
Operating Supply Voltage	3.3V
Interface	2-Wire, EBI/EMI, Ethernet, I2C, I2S, IrDA, LIN, SPI, UART, USART, USB
Max Supply Voltage	3.6V
Min Supply Voltage	1.65V
Memory Size	64kB
Oscillator Type	Internal
Number of I/O	160
RAM Size	64kB
Memory Type	ROM
uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC
Core Processor	ARM926EJ-S
Peripherals	DMA, LCD, POR, PWM, WDT
Bit Size	32
Watchdog Timer	Yes
Has ADC	YES
DMA Channels	YES
Data Bus Width	16b
PWM Channels	YES
Number of Timers/Counters	7
Address Bus Width	26
ROM (words)	65536
Core Architecture	ARM
Voltage - I/O	1.8V 3.3V
Number of ADC Channels	8
Ethernet	10/100Mbps
Number of Cores/Bus Width	1 Core 32-Bit
Graphics Acceleration	No
RAM Controllers	LPDDR, LPSDR, DDR2, SDR, SRAM
USB	USB 2.0 (3)
Additional Interfaces	AC97, EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART
ROM Programmability	FLASH
Display & Interface Controllers	LCD, Touchscreen
Height Seated (Max)	1.2mm
Length	15mm
RoHS Status	ROHS3 Compliant

AT91SAM9G45C-CU-999 Overview

With a packing size of 324-TFBGA, this embedded microprocessor is ideal for international shipping. High reliability is achieved using advanced packaging method Cut Tape (CT). CPUs have 1 Core 32-Bit cores/bus width. Identify the operating temperature around -40°C~85°C TA. It comes from the SAM9G series. The CPU is cored with a ARM926EJ-S processor. This CPU uses LPDDR, LPSDR, DDR2, SDR, SRAM RAM controllers. A AC97, EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART interface has been added to this microprocessor in order to serve the user better. 1.8V 3.3V is the CPU's I/O address. There is MICROCONTROLLER, RISC MICROCONTROLLER, RISC in the uPs, uCs, or peripheral ICs categories. Try searching for variants of the cpu microprocessor with AT91SAM9G45. The total number of terminations is 324. In the case of a 1V voltage supply, the embedded microprocessor should be turned on and run. There is a 32-Bit architecture in it. There is 400MHz frequency set for the CPU. For information about 324 pins, please refer to the datasheet. As a typical Microcontrollers, this cpu microprocessor has Microcontrollers display. Data can be transferred over 16b bandwidths. There are many applications that use the CPU with Surface Mount mounted. As of 3.3V, the CPU microprocessor is capable of functioning. In general, RAM (Random-Access Memory) is designed with a 64kB of 0MB. A voltage greater than 3.6V should not normally be applied to the embedded microprocessor. Micro processors should be supplied with 1.65V as their lowest voltage. 160 I/Os are used by CPU programs to transfer data. 64kB is the size of the CPU's memory. To determine the CPU's efficiency, 7 counters are used. This computer has DMA, LCD, POR, PWM, WDT peripherals attached to the CPU microprocessor.