AT91SAM9M10C-CU-999
| Parameters | |
|---|---|
| Frequency | 400MHz |
| Base Part Number | AT91SAM9M10 |
| Operating Supply Voltage | 1V |
| Interface | 2-Wire, EBI/EMI, Ethernet, I2C, SPI, UART, USART, USB |
| Max Supply Voltage | 1.1V |
| Min Supply Voltage | 900mV |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 160 |
| RAM Size | 64kB |
| Memory Type | L1 Cache, ROM, SRAM |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | DMA, LCD, POR, PWM, WDT |
| Bit Size | 32 |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | NO |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, LPSDR, DDR2, SDR, SRAM |
| USB | USB 2.0 (3) |
| Additional Interfaces | AC97, EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART |
| ROM Programmability | FLASH |
| Number of Cores | 1 |
| Display & Interface Controllers | LCD, Touchscreen, Video Decoder |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 324-TFBGA |
| Number of Pins | 324 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2010 |
| Series | SAM9M |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 324 |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1V |
| Terminal Pitch | 0.8mm |
AT91SAM9M10C-CU-999 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 324-TFBGA. High reliability is achieved by using advanced packaging methods Cut Tape (CT). There are 1 Core 32-Bit cores/bus width on the CPU. Be aware of the operating temperature around -40°C~85°C TA. The cpu microprocessor belongs to the SAM9M series. The CPU is powered by a ARM926EJ-S core. The CPU contains LPDDR, LPSDR, DDR2, SDR, SRAM RAM controllers. To serve better this microprocessor features AC97, EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces. The CPU runs at 1.8V 3.3V when it comes to I/O. It is a MICROCONTROLLER, RISC in terms of uPs/uCs/Peripheral ICs. The microprocessor can be searched for with AT91SAM9M10 if you are looking for variants. As a whole, there are 324 terminations. The microprocessor should be turned on and run with a voltage supply of 1V volts. 32-Bit is its architecture. A CPU operates at a frequency of 400MHz. Please refer to the datasheets for 324 pins functions. The size of data Bus of the CPU is based on 32b-bit system. A CPU with 1 cores. There are many applications that use the CPU with Surface Mount mounted. From 1V on, the CPU microprocessor will function. RAM (Random Access Memory) is designed to be 64kB. normal operation of the microprocessor should not require the device to be powered by a voltage higher than 1.1V. It is recommended to feed the CPU microprocessor with a voltage of 900mV. Data is transferred through 160 I/O ports by CPU programs. There is 64kB memory on the CPU. The CPU is connected to DMA, LCD, POR, PWM, WDT peripheral devices.
AT91SAM9M10C-CU-999 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
1-Core CPU
64kB RAM
160 I/Os
DMA, LCD, POR, PWM, WDT Peripherals
AT91SAM9M10C-CU-999 Applications
There are a lot of Microchip Technology AT91SAM9M10C-CU-999 Microprocessor applications.
- Copiers
- Microwave ovens
- Entertainment products
- Robots
- Vacuum cleaners
- Scanners
- Smoke alarms
- Microwave ovens
- Digital cameras
- Measuring revolving objects
