AT91SAM9M11B-CU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 324-TFBGA |
| Number of Pins | 324 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2010 |
| Series | SAM9M |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 324 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1V |
| Frequency | 400MHz |
| Base Part Number | AT91SAM9M11 |
| Operating Supply Voltage | 1.95V |
| Interface | 2-Wire, EBI/EMI, Ethernet, I2C, SPI, UART, USART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.65V |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 160 |
| RAM Size | 64kB |
| Memory Type | FLASH, ROM |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | DMA, LCD, POR, PWM, WDT |
| Bit Size | 32 |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 26 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.3V |
| Number of ADC Channels | 8 |
| Ethernet | 10/100Mbps |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, LPSDR, DDR2, SDR, SRAM |
| USB | USB 2.0 (3) |
| Additional Interfaces | AC97, EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART |
| Number of PWM Channels | 4 |
| Security Features | Cryptography |
| Display & Interface Controllers | LCD, Touchscreen, Video Decoder |
| Length | 15mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
AT91SAM9M11B-CU Overview
The microprocessor is conveniently packaged in 324-TFBGA, making it easy to ship internationally. Using advanced packaging techniques Tray, high reliability is ensured. There are 1 Core 32-Bit cores/bus width on the CPU. K-40°C~85°C TAw what the operating temperature is around -40°C~85°C TA. The cpu microprocessor belongs to the SAM9M series. The CPU is cored with a ARM926EJ-S processor. A total of LPDDR, LPSDR, DDR2, SDR, SRAM RAM controllers are used by this CPU. The microprocessor features interfaces AC97, EBI/EMI, I2C, ISI, MMC/SD/SDIO, SPI, SSC, UART/USART for better service. The CPU runs at 1.8V 3.3V when it comes to I/O. As far as the uPs/uCs/Peripheral ICs type is concerned, this is a MICROCONTROLLER, RISC. Try searching for variants of the cpu microprocessor with AT91SAM9M11. In total, there are 324 terminations. Turn on the cpu microprocessor and let it run with a 1V voltage supply. There is a 32-Bit architecture in it. CPUs operate with a frequency of 400MHz Hz. 324 pin functions are described in the datasheets. Microprocessors is a typical embedded microprocessor. In order to transfer data, there is a bandwidth of 32b. Surface Mount mounted, this CPU is widely used in many applications. There is a 1.95V function for the micro processor. RAM (Random Access Memory) is designed to be 64kB. It is generally recommended that users do not supply their embedded microprocessors with voltages higher than 3.6V. There should be 1.65V voltage applied to the CPU microprocessor below 1.65V. CPU programs transfer data via 160 I/Os. CPU memory is sized 64kB. It is possible to tell how busy the CPU is by using 2 counters. A CPU is connected to DMA, LCD, POR, PWM, WDT peripheral devices.
AT91SAM9M11B-CU Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
64kB RAM
160 I/Os
DMA, LCD, POR, PWM, WDT Peripherals
AT91SAM9M11B-CU Applications
There are a lot of Microchip Technology AT91SAM9M11B-CU Microprocessor applications.
- Blenders
- Air fryers
- Guidance-GPS
- Calculators
- Current meter
- Network communication, mobile communication field
- DDC control
- Fax machines
- Set-top boxes
- Removable disks
