AT91SAM9N12-CUR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Package / Case | 217-LFBGA |
| Surface Mount | YES |
| Number of Pins | 217 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 1997 |
| Series | SAM9N |
| JESD-609 Code | e8 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 217 |
| Terminal Finish | Tin/Silver/Copper (Sn98.5Ag1.0Cu0.5) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Base Part Number | AT91SAM9N12 |
| Power Supplies | 11.8/3.33.3V |
| Interface | EBI/EMI, I2C, SPI, UART, USART, USB |
| Max Supply Voltage | 1.1V |
| Min Supply Voltage | 900mV |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 105 |
| Memory Type | ROM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | DMA, LCD, POR, PWM, WDT |
| Bit Size | 32 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 3.3V |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, LPDDR2, DDR2, SDR, SRAM |
| USB | USB 2.0 (2) |
| Additional Interfaces | EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART |
| Display & Interface Controllers | LCD, Touchscreen |
| RoHS Status | ROHS3 Compliant |
AT91SAM9N12-CUR Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 217-LFBGA. Advanced packaging method Cut Tape (CT) is used to provide high reliability. 1 Core 32-Bit cores/Bus width are present in the CPU. Extended operating temperature around -40°C~85°C TA. A SAM9N series item. A ARM926EJ-S processor powers this CPU. It has LPDDR, LPDDR2, DDR2, SDR, SRAM RAM controllers. Featuring EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces, this microprocessor can better serve you. As far as I/O is concerned, this CPU runs at 1.8V 3.3V. The type MICROPROCESSOR, RISC belongs to uPs/uCs/Peripheral ICs. The microprocessor can be searched for with AT91SAM9N12 if you are looking for variants. A total of 217 terminations have been recorded. The architecture of the microprocessor is 32-bit. A 400MHz frequency is used by the CPU. For functions of 217 pins, please refer to the datasheets. A typical Microprocessors embedded microprocessor. As specified in datasheets, the embedded microprocessor requires 11.8/3.33.3V power supplies. It is generally recommended that users do not supply their embedded microprocessors with voltages higher than 1.1V. There should be 900mV voltage applied to the CPU microprocessor below 900mV. CPU programs transfer data via 105 I/Os. 128kB bytes of memory are allocated to the CPU. A total of DMA, LCD, POR, PWM, WDT peripheral devices are connected to the CPU.
AT91SAM9N12-CUR Features
ARM926EJ-S Core
32-Bit Structure
105 I/Os
DMA, LCD, POR, PWM, WDT Peripherals
AT91SAM9N12-CUR Applications
There are a lot of Microchip Technology AT91SAM9N12-CUR Microprocessor applications.
- Air fryers
- Industrial control field
- Oil and gas
- Telephone sets
- Toasters
- Laminators
- Guidance-GPS
- Smart instruments
- Information appliances (networking of household appliances)
- Hand-held metering systems
