AT91SAM9X25-CU-999
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Silver, Tin |
| Mount | Surface Mount |
| Package / Case | 217-LFBGA |
| Number of Pins | 217 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Series | SAM9X |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 217 |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Base Part Number | AT91SAM9X25 |
| Power Supplies | 11.8/3.33.3V |
| Interface | CAN, EBI/EMI, Ethernet, I2C, LIN, MMC, SPI, UART, USART, USB |
| Max Supply Voltage | 1.1V |
| Min Supply Voltage | 900mV |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 105 |
| RAM Size | 32kB |
| Memory Type | ROM |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Peripherals | DMA, POR, PWM, WDT |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| Voltage - I/O | 1.8V 2.5V 3.0V 3.3V |
| Ethernet | 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | LPDDR, LPDDR2, DDR2, DDR, SDR, SRAM |
| USB | USB 2.0 (3) |
| Additional Interfaces | CAN, EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART |
| RoHS Status | ROHS3 Compliant |
AT91SAM9X25-CU-999 Overview
Shipping overseas is convenient thanks to the embedded microprocessor's packaging in 217-LFBGA. Advanced packaging method Cut Tape (CT) is used to provide high reliability. There are 1 Core 32-Bit cores per bus width on the CPU. Extended operating temperature around -40°C~85°C TA. From the SAM9X series. Core-wise, this CPU has a ARM926EJ-S processor. The CPU uses LPDDR, LPDDR2, DDR2, DDR, SDR, SRAM RAM controllers. This microprocessor has CAN, EBI/EMI, I2C, MMC/SD/SDIO, SPI, SSC, UART/USART interfaces to serve you better. At 1.8V 2.5V 3.0V 3.3V, the CPU runs its I/O. uPs/uCs/Peripheral ICs type is MICROPROCESSOR, RISC. To find variants of the microprocessor, try searching with AT91SAM9X25. The total number of terminations is 217. There is a 32-Bit architecture in it. CPUs operate at 400MHz Hz. You can refer to the datasheets for the functions of 217 pins. A typical Microprocessors embedded microprocessor. The bandwidth required to transfer data is 32b. There are many applications for this CPU, since it is Surface Mount mounted. The micro processor requires 11.8/3.33.3V power supplies according to the datasheets. There is 32kB RAM (Random Access Memory) built in. A voltage greater than 1.1V should not normally be applied to the embedded microprocessor. 900mV should be the lowest voltage fed to the CPU microprocessor. There are 105 I/Os connected to the CPU programs. Its memory size is 64kB. Counters 6 indicate how busy the CPU is. The CPU is connected to DMA, POR, PWM, WDT peripheral devices.
AT91SAM9X25-CU-999 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
32kB RAM
105 I/Os
DMA, POR, PWM, WDT Peripherals
AT91SAM9X25-CU-999 Applications
There are a lot of Microchip Technology AT91SAM9X25-CU-999 Microprocessor applications.
- Blood pressure monitors
- Electromechanical control
- Entertainment-radios, CD players, televisions
- Binding machines
- Petrochemical
- Food and beverage
- Mobile computers
- Industrial robot
- Industrial instrumentation devices
- Firewalls
