AT9932TS-G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Controller |
| Applications | Automotive |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz~800kHz |
| Base Part Number | AT9932 |
| Number of Outputs | 1 |
| Max Supply Voltage | 40V |
| Min Supply Voltage | 5.3V |
| Power Dissipation | 1W |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Internal Switch(s) | No |
| High Level Output Current | -200μA |
| Low Level Output Current | 200μA |
| fmax-Min | 0.58 MHz |
| Dimming | PWM |
| Number of Segments | 1 |
| Voltage - Supply (Min) | 5.3V |
| Multiplexed Display Capability | NO |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AT9932TS-G Overview
As a result of its 24-TSSOP (0.173, 4.40mm Width) package, it helps to save board space on the board. 1 outputs are designed into LED drivers.In this case, mounting method is Surface Mount.With high efficiency and reliable performance, it emerges as a DC DC Controller.-40°C~150°C TJ is the operating temperature for the led light driver.It is clear that Automotive will benefit from the program.100kHz~800kHz is the frequency in which it operates.In this case, it operates with terminations of 0.This configuration is built upon 24 pins.It is possible for undetermined failures to occur if the voltage supply is lower than 5.3V.There are estimated to be 1 segments.Surface Mount has been mounted with the device.The LED driver is available under the part number AT9932.A maximum supply voltage of 40V is acceptable.This system is designed to operate at a minimum voltage of 5.3V to achieve maximum efficiency.LED drivers in the Automotive, AEC-Q100 series are essential for a wide range of applications.
AT9932TS-G Features
Available in the 24-TSSOP (0.173, 4.40mm Width) package
Operating temperature of -40°C~150°C TJ
Frequency of 100kHz~800kHz
Supply voltage of 12V
AT9932TS-G Applications
There are a lot of Microchip Technology AT9932TS-G LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED headlights
- Museum lighting
- Architectural lighting
- LED backlight driver for LCD displays for portable equipment
- LED Lightings for Inspection Devices
- Medical surgery lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
