Parameters |
Power Supplies |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Number of I/O |
32 |
Memory Type |
FLASH |
Propagation Delay |
10 ns |
Frequency (Max) |
125MHz |
Number of Gates |
1000 |
Number of Macro Cells |
32 |
JTAG BST |
NO |
In-System Programmable |
NO |
Height Seated (Max) |
1.2mm |
Length |
10mm |
Width |
10mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Package / Case |
A |
Number of Pins |
44 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
44 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
NO |
HTS Code |
8542.31.00.01 |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Supply Voltage |
5V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
44 |
Operating Supply Voltage |
5V |
ATF1500A-10AI Overview
There are 32 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a A package.In this case, there are 32 I/Os programmed.It is programmed to terminate devices at [0].A voltage of 5Vprovides power to the device.There are 44pins on the chip.If you use this device, you will also find [0].In digital circuits, 1000gates serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].Data is stored using [0].Surface Mountis the mounting point of this electronic part.The pins are [0].There is a maximum supply voltage of 5.5V.The device is designed to operate with a minimal supply voltage of 4.5VV.There is 5V power supply available for it.There should be a temperature above -40°Cat the time of operation.It is recommended to keep the operating temperature below 85°C.It is recommended that the maximal frequency be less than 0.
ATF1500A-10AI Features
A package
32 I/Os
44 pin count
44 pins
5V power supplies
ATF1500A-10AI Applications
There are a lot of Atmel (Microchip Technology) ATF1500A-10AI CPLDs applications.
- Dedicated input registers
- DDC INTERFACE
- Handheld digital devices
- Programmable polarity
- Discrete logic functions
- Software-Driven Hardware Configuration
- Preset swapping
- Custom shift registers
- Field programmable gate
- Bootloaders for FPGAs