banner_page

ATF1500A-12JC

5V 1.27mm PMIC 44 Pin 5V J


  • Manufacturer: Atmel (Microchip Technology)
  • Nocochips NO: 69-ATF1500A-12JC
  • Package: J
  • Datasheet: -
  • Stock: 689
  • Description: 5V 1.27mm PMIC 44 Pin 5V J (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case J
Number of Pins 44
JESD-609 Code e0
Moisture Sensitivity Level (MSL) 2
Number of Terminations 44
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature NO
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Peak Reflow Temperature (Cel) 225
Supply Voltage 5V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 44
Qualification Status Not Qualified
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Number of I/O 32
Memory Type FLASH
Propagation Delay 12 ns
Frequency (Max) 100MHz
Number of Gates 1000
Output Function MACROCELL
Number of Macro Cells 32
JTAG BST NO
In-System Programmable NO
Height Seated (Max) 4.572mm
Length 16.586mm
Width 16.586mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

ATF1500A-12JC Overview


There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is enclosed in a J package.There are 32 I/Os on the board.It is programmed to terminate devices at [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power supply voltage is 5V.There is a part included in Programmable Logic Devices.In this chip, the 44pins are programmed.It is also characterized by NO.In digital circuits, there are 1000gates, which act as a basic building block.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.For data storage, FLASHis adopted.The electronic component is mounted by Surface Mount.It is designed with 44 pins.It operates with the maximal supply voltage of 5.25V.The minimal supply voltage is 4.75V.It runs on 5Vvolts of power.Ideally, the operating temperature should be greater than 0°C.It is recommended that the operating temperature be lower than 70°C.A maximum frequency of less than 100MHzis recommended.

ATF1500A-12JC Features


J package
32 I/Os
44 pin count
44 pins
5V power supplies

ATF1500A-12JC Applications


There are a lot of Atmel (Microchip Technology) ATF1500A-12JC CPLDs applications.

  • Protection relays
  • Code converters
  • DDC INTERFACE
  • SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
  • Network Interface Card (NIC) and Host Bus Adapter (HBA)
  • I2C BUS INTERFACE
  • Field programmable gate
  • Digital designs
  • Random logic replacement
  • ANALOG-TO-DIGITAL CONVERTOR (ADC)

Write a review

Note: HTML is not translated!
    Bad           Good