ATF1500A-15AC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | A |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | NO |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of I/O | 32 |
| Clock Frequency | 52.6MHz |
| Propagation Delay | 15 ns |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATF1500A-15AC Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the Apackage, you will find it.There are 32 I/Os on the board.Terminations of devices are set to [0].The power source is powered by 5Vvolts.It has 44pins programmed.If this device is used, you will also be able to find [0].This device is mounted by Surface Mount.This board has 44 pins.This device runs on 5Vvolts of electricity.Vsup reaches 5.25Vas the maximum supply voltage.There should be a temperature above 0°Cat the time of operation.It is recommended that the operating temperature be below 70°C.There should be a higher supply voltage (Vsup) than 4.75V.It is recommended that the clock frequency not exceed 52.6MHz.
ATF1500A-15AC Features
A package
32 I/Os
44 pin count
44 pins
5V power supplies
ATF1500A-15AC Applications
There are a lot of Atmel (Microchip Technology) ATF1500A-15AC CPLDs applications.
- TIMERS/COUNTERS
- D/T registers and latches
- ON-CHIP OSCILLATOR CIRCUIT
- Digital multiplexers
- Programmable polarity
- Handheld digital devices
- I/O expansion
- PULSE WIDTH MODULATION (PWM)
- LED Lighting systems
- Address decoding
