Parameters |
Mount |
Surface Mount |
Package / Case |
A |
Number of Pins |
44 |
JESD-609 Code |
e0 |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
44 |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
NO |
HTS Code |
8542.39.00.01 |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Supply Voltage |
3V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
44 |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3/5V |
Supply Voltage-Min (Vsup) |
2.7V |
Number of I/O |
32 |
Clock Frequency |
62.5MHz |
Propagation Delay |
12 ns |
Number of Gates |
1500 |
Number of Macro Cells |
32 |
JTAG BST |
NO |
In-System Programmable |
NO |
Height Seated (Max) |
1.2mm |
Length |
10mm |
Width |
10mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ATF1500ABV-12AC Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).The item is enclosed in a A package.In this case, there are 32 I/Os programmed.Terminations of devices are set to [0].There is 3V voltage supply for this device.With 44pins programmed, the chip is ready to use.Additionally, this device is capable of displaying [0].In digital circuits, 1500gates serve as building blocks.A Surface Mountis mounted on this electronic component.A total of 44pins are provided on this board.It operates from 3/5V power supplies.Vsup reaches 5.5Vas the maximum supply voltage.It is recommended that the operating temperature exceed 0°C.The operating temperature should be lower than 70°C.In order to operate properly, the supply voltage (Vsup) should be greater than 2.7V.A frequency of 62.5MHzshould not be exceeded by its clock.
ATF1500ABV-12AC Features
A package
32 I/Os
44 pin count
44 pins
3/5V power supplies
ATF1500ABV-12AC Applications
There are a lot of Atmel (Microchip Technology) ATF1500ABV-12AC CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Auxiliary Power Supply Isolated and Non-isolated
- I2C BUS INTERFACE
- INTERRUPT SYSTEM
- Random logic replacement
- State machine control
- Power automation
- Address decoders
- POWER-SAVING MODES
- Programmable power management