banner_page

ATF1500ABV-12JC

3/5V 1.27mm PMIC 44 Pin 3V J


  • Manufacturer: Atmel (Microchip Technology)
  • Nocochips NO: 69-ATF1500ABV-12JC
  • Package: J
  • Datasheet: -
  • Stock: 278
  • Description: 3/5V 1.27mm PMIC 44 Pin 3V J (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case J
Number of Pins 44
JESD-609 Code e0
Moisture Sensitivity Level (MSL) 2
Number of Terminations 44
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature NO
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Peak Reflow Temperature (Cel) 225
Supply Voltage 3V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 44
Qualification Status Not Qualified
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3/5V
Temperature Grade COMMERCIAL
Supply Voltage-Min (Vsup) 2.7V
Number of I/O 32
Clock Frequency 62.5MHz
Propagation Delay 12 ns
Programmable Logic Type FLASH PLD
Output Function MACROCELL
Number of Macro Cells 32
JTAG BST NO
In-System Programmable NO
Height Seated (Max) 4.57mm
Length 16.5862mm
Width 16.5862mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

ATF1500ABV-12JC Overview


32macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is enclosed in a J package.As a result, it has 32 I/O ports programmed.It is programmed that device terminations will be 44 .This electrical component has a terminal position of 0.The power supply voltage is 3V.It is a part of family [0].It is programmed with 44 pins.If you use this device, you will also find [0].Surface Mountis the mounting point of this electronic part.The pins are [0].It operates from 3/5V power supplies.5.5Vis the maximum supply voltage (Vsup).In order to operate properly, the operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.Voltage supply (Vsup) should be higher than 2.7V.It is recommended that the clock frequency not exceed 62.5MHz.It is possible to classify programmable logic as FLASH PLD.

ATF1500ABV-12JC Features


J package
32 I/Os
44 pin count
44 pins
3/5V power supplies

ATF1500ABV-12JC Applications


There are a lot of Atmel (Microchip Technology) ATF1500ABV-12JC CPLDs applications.

  • Pattern recognition
  • Power up sequencing
  • Multiple Clock Source Selection
  • USB Bus
  • I/O PORTS (MCU MODULE)
  • POWER-SAVING MODES
  • Storage Cards and Storage Racks
  • Page register
  • Voltage level translation
  • Reset swapping

Write a review

Note: HTML is not translated!
    Bad           Good