ATF1500ABV-15AC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | A |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 44 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | NO |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of I/O | 32 |
| Clock Frequency | 52.6MHz |
| Propagation Delay | 15 ns |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| In-System Programmable | NO |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATF1500ABV-15AC Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.It is part of the A package.The device has 32inputs and outputs.There is a 44terminations set on devices.Power is provided by a supply voltage of 3V volts.The chip is programmed with 44 pins.When using this device, NOcan also be found.A Surface Mountis mounted on this electronic component.44pins are included in its design.The system runs on a power supply of 3/5V watts.Initially, the maximum supply voltage (Vsup) is 5.5V.It is recommended that the operating temperature be higher than 0°C.Temperatures should not exceed 70°C.If the supply voltage (Vsup) is greater than 2.7V, then the device will work properly.The clock frequency of the device should not exceed 52.6MHz.
ATF1500ABV-15AC Features
A package
32 I/Os
44 pin count
44 pins
3/5V power supplies
ATF1500ABV-15AC Applications
There are a lot of Atmel (Microchip Technology) ATF1500ABV-15AC CPLDs applications.
- INTERRUPT SYSTEM
- I/O expansion
- ToR/Aggregation/Core Switch and Router
- PLC analog input modules
- I/O PORTS (MCU MODULE)
- Bootloaders for FPGAs
- Custom state machines
- Boolean function generators
- Configurable Addressing of I/O Boards
- Software-Driven Hardware Configuration
