Parameters |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Supply Voltage |
3V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
44 |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
3/5V |
Supply Voltage-Min (Vsup) |
2.7V |
Number of I/O |
32 |
Clock Frequency |
52.6MHz |
Propagation Delay |
15 ns |
Number of Macro Cells |
32 |
JTAG BST |
NO |
In-System Programmable |
NO |
Height Seated (Max) |
1.2mm |
Length |
10mm |
Width |
10mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mount |
Surface Mount |
Package / Case |
A |
Number of Pins |
44 |
JESD-609 Code |
e0 |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
44 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
NO |
HTS Code |
8542.39.00.01 |
Technology |
CMOS |
ATF1500ABV-15AI Overview
There are 32 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The product is contained in a A package.There are 32 I/Os on the board.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The power source is powered by 3Vvolts.The chip is programmed with 44 pins.If you use this device, you will also find [0].It is mounted by Surface Mount.This board has 44 pins.A power supply of 3/5Vis required to operate it.Initially, the maximum supply voltage (Vsup) is 5.5V.It is recommended that the operating temperature exceeds -40°C.There should be a temperature below 85°Cat the time of operation.A supply voltage (Vsup) of greater than 2.7V should be used.Its clock frequency should not exceed 52.6MHz.
ATF1500ABV-15AI Features
A package
32 I/Os
44 pin count
44 pins
3/5V power supplies
ATF1500ABV-15AI Applications
There are a lot of Atmel (Microchip Technology) ATF1500ABV-15AI CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Programmable polarity
- Pattern recognition
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Dedicated input registers
- Digital multiplexers
- Preset swapping
- Power automation
- Address decoding
- I/O PORTS (MCU MODULE)