banner_page

ATF1500ABV-15JC

3/5V 1.27mm PMIC 44 Pin 3V J


  • Manufacturer: Atmel (Microchip Technology)
  • Nocochips NO: 69-ATF1500ABV-15JC
  • Package: J
  • Datasheet: -
  • Stock: 752
  • Description: 3/5V 1.27mm PMIC 44 Pin 3V J (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case J
Number of Pins 44
JESD-609 Code e0
Moisture Sensitivity Level (MSL) 2
Number of Terminations 44
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature NO
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Peak Reflow Temperature (Cel) 225
Supply Voltage 3V
Terminal Pitch 1.27mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 44
Qualification Status Not Qualified
Operating Supply Voltage 4.125V
Power Supplies 3/5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 3V
Number of I/O 32
Memory Type EEPROM
Propagation Delay 15 ns
Frequency (Max) 71.4MHz
Programmable Logic Type FLASH PLD
Output Function MACROCELL
Number of Macro Cells 32
JTAG BST NO
In-System Programmable NO
Height Seated (Max) 4.57mm
Length 16.5862mm
Width 16.5862mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

ATF1500ABV-15JC Overview


32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is contained in package [0].It is programmed with 32 I/Os.The termination of a device is set to [0].This electrical component has a terminal position of 0.There is 3V voltage supply for this device.The part belongs to Programmable Logic Devices family.A chip with 44pins is programmed.It is also characterized by NO.The supply voltage should be maintained at 4.125V for high efficiency.In this case, EEPROMwill be used to store the data.The electronic part is mounted by Surface Mount.The device is designed with pins [0].A maximum voltage of 5.25Vis required for operation.Initially, it requires a voltage of 3Vas the minimum supply voltage.It runs on a voltage of 3/5Vvolts.In order to operate, the temperature should be higher than 0°C.A temperature less than 70°Cshould be used for operation.The maximum frequency should not exceed 71.4MHz.There is a type of programmable logic called FLASH PLD.

ATF1500ABV-15JC Features


J package
32 I/Os
44 pin count
44 pins
3/5V power supplies

ATF1500ABV-15JC Applications


There are a lot of Atmel (Microchip Technology) ATF1500ABV-15JC CPLDs applications.

  • PULSE WIDTH MODULATION (PWM)
  • Preset swapping
  • Wireless Infrastructure Base Band Unit and Remote Radio Unit
  • Multiple DIP Switch Replacement
  • PLC analog input modules
  • Page register
  • I/O PORTS (MCU MODULE)
  • Parity generators
  • DMA control
  • Field programmable gate

Write a review

Note: HTML is not translated!
    Bad           Good