ATF1502AS-10JU44
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Weight | 2.386605g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | ATF15xx |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Frequency | 125MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATF1502AS |
| Operating Supply Voltage | 5V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 75mA |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 750 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height | 4.06mm |
| Length | 16.66mm |
| Width | 16.66mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF1502AS-10JU44 Overview
This network has 32macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The product is contained in a 44-LCC (J-Lead) package.As you can see, this device has 32 I/O ports programmed into it.There are 44 terminations programmed into the device.The terminal position of this electrical component is QUAD.A voltage of 5Vprovides power to the device.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tube.The operating temperature of the machine is -40°C~85°C TA to ensure its reliability.Surface Mountshould be used for mounting the chip.As part of the ATF15xxseries, it is a type of FPGA.When using this device, YESis also available.The ATF1502AScontains its related parts.It is possible to construct digital circuits using 750gates, which are devices that serve as building blocks.A high level of efficiency can be achieved by maintaining the supply voltage at [0].It is recommended to store data in [0].The electronic component is mounted by Surface Mount, Through Hole.It is designed with 44 pins.In this case, the maximum supply voltage is 5.5V.A minimum supply voltage of 4.5V is required for this device to operate.This frequency is 125MHz.Its basic building block is composed of 2 logic blocks (LABs).
ATF1502AS-10JU44 Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pins
2 logic blocks (LABs)
ATF1502AS-10JU44 Applications
There are a lot of Microchip Technology ATF1502AS-10JU44 CPLDs applications.
- I2C BUS INTERFACE
- TIMERS/COUNTERS
- Power up sequencing
- Power automation
- USB Bus
- Software Configuration of Add-In Boards
- Software-Driven Hardware Configuration
- Parity generators
- Battery operated portable devices
- I/O PORTS (MCU MODULE)
