ATF1502ASL-25JC44
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | J |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 25 ns |
| Frequency (Max) | 60MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 750 |
| Number of Logic Blocks (LABs) | 2 |
| Speed Grade | 25 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Length | 16.586mm |
| Width | 16.586mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATF1502ASL-25JC44 Overview
In the mobile phone network, there are 32macro cells, which are cells with high-power antennas and towers.There is a J package containing it.There are 32 I/Os programmed in it.44terminations are programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.An electrical supply voltage of 5V is used to power it.This part is in the family [0].The chip is programmed with 44 pins.This device also displays [0].There are 750 gates, which are devices that acts as a building block for digital circuits. It is recommended that the supply voltage be kept at 5Vto maximize efficiency.Data storage is performed using [0].It is mounted by Surface Mount.The pins are [0].It operates with the maximal supply voltage of 5.25V.A minimum supply voltage of 4.75V is required for this device to operate.Ideally, the operating temperature should be greater than 0°C.A temperature lower than 70°Cis recommended for operation.It consists of 2 logic blocks (LABs).It is recommended that the maximal frequency be lower than 60MHz.There is a type of programmable logic called EE PLD.
ATF1502ASL-25JC44 Features
J package
32 I/Os
44 pin count
44 pins
2 logic blocks (LABs)
ATF1502ASL-25JC44 Applications
There are a lot of Atmel (Microchip Technology) ATF1502ASL-25JC44 CPLDs applications.
- Reset swapping
- Boolean function generators
- Code converters
- Interface bridging
- POWER-SAVING MODES
- Field programmable gate
- Cross-Matrix Switch
- ON-CHIP OSCILLATOR CIRCUIT
- DMA control
- Timing control
