ATF1504AS-15AC100
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Supplier Device Package | 100-TQFP (14x14) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | ATF15xx |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 100MHz |
| Base Part Number | ATF1504AS |
| Operating Supply Voltage | 5V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1500 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 64 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 15 |
| Number of Macro Cells | 64 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 15ns |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATF1504AS-15AC100 Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.There is a 100-TQFP package containing it.There are 64 I/Os on the board.Package the chip by Tray.To ensure reliability, the device operates at a temperature of [0].Surface Mountshould be used for mounting the chip.The ATF15xxseries comprises this type of FPGA.The ATF1504AScontains its related parts.In digital circuits, 1500gates serve as building blocks.High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].Surface Mountmounts this electronic component.There are 100pins on it.It operates with the maximal supply voltage of 5.25V.A minimum supply voltage of 4.75V is required for this device to operate.There are 64 Programmable I/Os.In this case, 100MHzis the frequency that can be achieved.It is recommended that the maximal frequency be lower than 125MHz.Ideally, the operating temperature should be greater than 0°C.A temperature less than 70°Cshould be used for operation.Its basic building block is composed of 4 logic blocks (LABs).Basic building blocks have 4logic elements.
ATF1504AS-15AC100 Features
100-TQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pins
4 logic blocks (LABs)
ATF1504AS-15AC100 Applications
There are a lot of Microchip Technology ATF1504AS-15AC100 CPLDs applications.
- Reset swapping
- STANDARD SERIAL INTERFACE UART
- Power up sequencing
- Bootloaders for FPGAs
- Page register
- Interface bridging
- Digital multiplexers
- Power automation
- Configurable Addressing of I/O Boards
- State machine design
