ATF1504ASL-20AC100
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Supplier Device Package | 100-TQFP (14x14) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | ATF15xx |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Base Part Number | ATF1504ASL |
| Operating Supply Voltage | 5V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 20 ns |
| Number of Logic Elements/Cells | 4 |
| Number of Gates | 1500 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 64 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 20 |
| Number of Macro Cells | 64 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 20ns |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATF1504ASL-20AC100 Overview
64macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is packaged with 100-TQFP.In this case, there are 64 I/Os programmed.It is packaged in the way of Tray.A reliable operation is ensured by the operating temperature of [0].It is recommended that the chip be mounted by Surface Mount.In FPGA terms, it is a type of ATF15xxseries FPGA.The ATF1504ASLshows its related parts.A digital circuit can be constructed using 1500gates.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.It is recommended that data be stored in [0].Surface Mountis used to mount this electronic component.100pins are included in its design.There is a maximum supply voltage of 5.25V.A minimum supply voltage of 4.75V is required for it to operate.There are a total of 64 Programmable I/Os.It should be below 83.3MHzat the maximal frequency.Ideally, the operating temperature should be greater than 0°C.It is recommended that the operating temperature be lower than 70°C.In total, it contains 4 logic blocks (LABs).As a fundamental building block, there are 4 logic elements/cells.
ATF1504ASL-20AC100 Features
100-TQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pins
4 logic blocks (LABs)
ATF1504ASL-20AC100 Applications
There are a lot of Microchip Technology ATF1504ASL-20AC100 CPLDs applications.
- Storage Cards and Storage Racks
- Digital multiplexers
- DMA control
- Configurable Addressing of I/O Boards
- I2C BUS INTERFACE
- Software Configuration of Add-In Boards
- I/O expansion
- High speed graphics processing
- Timing control
- Interface bridging
