ATF1504ASL-25AU44
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | ATF15xx |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Additional Feature | POWER -UP RESET; SECURITY FUSE |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATF1504ASL |
| Number of Outputs | 32 |
| Operating Supply Voltage | 5V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 25 ns |
| Turn On Delay Time | 25 ns |
| Number of Gates | 1500 |
| Number of Logic Blocks (LABs) | 4 |
| Speed Grade | 25 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | YES |
| Voltage Supply - Internal | 4.5V~5.5V |
| Number of Product Terms | 40 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF1504ASL-25AU44 Overview
There are 64 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.In the 44-TQFPpackage, you will find it.As a result, it has 32 I/O ports programmed.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical component has a terminal position of 0.The power supply voltage is 5V.Trayis the packaging method.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.The ATF15xxseries FPGA is one of these types.If you use this device, you will also find [0].You can find its related parts in the [0].In digital circuits, 1500gates serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].This electronic part is mounted in the way of Surface Mount.A total of 44pins are provided on this board.It operates with the maximal supply voltage of 5.5V.With a minimal supply voltage of [0], it operates.This frequency can be achieved at 60MHz.There are 4logic blocks (LABs) that make up its basic building block.This device is configured with a 32 output.In addition, it contains 40 product terms.
ATF1504ASL-25AU44 Features
44-TQFP package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pins
4 logic blocks (LABs)
32 outputs
ATF1504ASL-25AU44 Applications
There are a lot of Microchip Technology ATF1504ASL-25AU44 CPLDs applications.
- Custom state machines
- LED Lighting systems
- STANDARD SERIAL INTERFACE UART
- Multiple Clock Source Selection
- Pattern recognition
- Software-driven hardware configuration
- Wide Vin Industrial low power SMPS
- Page register
- TIMERS/COUNTERS
- Complex programmable logic devices
