ATF1504ASV-15JC44
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Supplier Device Package | 44-PLCC (16.6x16.6) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | ATF15xx |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 76.9MHz |
| Base Part Number | ATF1504ASV |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 32 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Number of Gates | 1500 |
| Max Frequency | 76.9MHz |
| Number of Programmable I/O | 32 |
| Speed Grade | 15 |
| Number of Macro Cells | 64 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 15ns |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATF1504ASV-15JC44 Overview
In the mobile phone network, there are 64macro cells, which are cells with high-power antennas and towers.It is embedded in the 44-LCC (J-Lead) package.It is programmed with 32 I/Os.It is recommended that the chip be packaged by Tube.During operation, the operating temperature is kept at 0°C~70°C TA to ensure its reliability.The chip should be mounted by Surface Mount.As part of the ATF15xxseries, it is a type of FPGA.In accordance with the [0], its related parts are listed.In digital circuits, 1500gates serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.Surface Mountis the mounting point of this electronic part.This board has 44 pins.There is a maximum supply voltage of 3.6V.A minimum supply voltage of 3V is required for it to operate.There are 32 Programmable I/Os.This frequency can be achieved at 76.9MHz.The maximal frequency should be lower than 76.9MHz.Operating temperatures should be higher than 0°C.A temperature less than 70°Cshould be used for operation.
ATF1504ASV-15JC44 Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pins
ATF1504ASV-15JC44 Applications
There are a lot of Microchip Technology ATF1504ASV-15JC44 CPLDs applications.
- Software-driven hardware configuration
- Handheld digital devices
- DMA control
- Power up sequencing
- Parity generators
- ROM patching
- POWER-SAVING MODES
- Bootloaders for FPGAs
- Digital multiplexers
- PULSE WIDTH MODULATION (PWM)
