ATF1508AS-10AC100
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Number of Pins | 100 |
| Supplier Device Package | 100-TQFP (14x14) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1997 |
| Series | ATF15xx |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 125MHz |
| Base Part Number | ATF1508AS |
| Operating Supply Voltage | 5V |
| Programmable Type | In System Programmable (min 10K program/erase cycles) |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 80 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 8 |
| Number of Gates | 3000 |
| Max Frequency | 125MHz |
| Number of Programmable I/O | 80 |
| Number of Logic Blocks (LABs) | 8 |
| Speed Grade | 10 |
| Number of Macro Cells | 128 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATF1508AS-10AC100 Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is contained in package [0].The device has 80inputs and outputs.Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Surface Mountshould be used for mounting the chip.FPGAs belonging to the ATF15xxseries contain this type of chip.You can find its related parts in the [0].It is possible to construct digital circuits using 3000gates, which are devices that serve as building blocks.In order to maintain high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].This electronic part is mounted in the way of Surface Mount.There are 100 pins embedded in the device.It operates at a maximum supply voltage of 5.25V volts.The device is designed to operate with a minimal supply voltage of 4.75VV.In total, there are 80programmable I/Os.The frequency that can be achieved is 125MHz.There should be a lower maximum frequency than 125MHz.It is recommended that the operating temperature exceeds 0°C.There should be a temperature below 70°Cat the time of operation.There are 8logic blocks (LABs) that make up its basic building block.Fundamental building blocks consist of 8logic elements/cells.
ATF1508AS-10AC100 Features
100-TQFP package
80 I/Os
The operating temperature of 0°C~70°C TA
100 pins
8 logic blocks (LABs)
ATF1508AS-10AC100 Applications
There are a lot of Microchip Technology ATF1508AS-10AC100 CPLDs applications.
- Bootloaders for FPGAs
- Voltage level translation
- Address decoders
- Programmable polarity
- Address decoding
- Power up sequencing
- Power Meter SMPS
- Handheld digital devices
- Software Configuration of Add-In Boards
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
