banner_page

ATF1508AS-10QC100

3.3/55V 0.65mm PMIC 100 Pin 5V PQFP


  • Manufacturer: Atmel (Microchip Technology)
  • Nocochips NO: 69-ATF1508AS-10QC100
  • Package: PQFP
  • Datasheet: -
  • Stock: 822
  • Description: 3.3/55V 0.65mm PMIC 100 Pin 5V PQFP (Kg)

Details

Tags

Parameters
Number of I/O 80
Memory Type EEPROM
Propagation Delay 10 ns
Frequency (Max) 125MHz
Programmable Logic Type EE PLD
Number of Gates 3000
Number of Programmable I/O 80
Number of Logic Blocks (LABs) 8
Speed Grade 10
Output Function MACROCELL
Number of Macro Cells 128
JTAG BST YES
In-System Programmable YES
Height Seated (Max) 3.4mm
Length 20mm
Width 14mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount
Package / Case PQFP
Number of Pins 100
JESD-609 Code e0
Pbfree Code no
Moisture Sensitivity Level (MSL) 3
Number of Terminations 100
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Subcategory Programmable Logic Devices
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 100
Power Supplies 3.3/55V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V

ATF1508AS-10QC100 Overview


There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is enclosed in a PQFP package.The device is programmed with 80 I/O ports.Terminations of devices are set to [0].The terminal position of this electrical component is QUAD.Power is supplied by a voltage of 5V volts.It is a part of family [0].It is programmed with 100 pins.A digital circuit is built using 3000gates.In order to store data, EEPROMis used.It is mounted by Surface Mount.This board has 100 pins.This device operates at a voltage of 5.25V when the maximum supply voltage is applied.A minimum supply voltage of 4.75V is required for this device to operate.The system runs on a power supply of 3.3/55V watts.A programmable I/O count of 80 has been recorded.Operating temperatures should be higher than 0°C.The operating temperature should be lower than 70°C.Its basic building block is composed of 8 logic blocks (LABs).The maximum frequency should not exceed 125MHz.A programmable logic type can be categorized as EE PLD.

ATF1508AS-10QC100 Features


PQFP package
80 I/Os
100 pin count
100 pins
3.3/55V power supplies
8 logic blocks (LABs)

ATF1508AS-10QC100 Applications


There are a lot of Atmel (Microchip Technology) ATF1508AS-10QC100 CPLDs applications.

  • Programmable power management
  • D/T registers and latches
  • Cross-Matrix Switch
  • Digital systems
  • Network Interface Card (NIC) and Host Bus Adapter (HBA)
  • Protection relays
  • Storage Cards and Storage Racks
  • I/O PORTS (MCU MODULE)
  • TIMERS/COUNTERS
  • Power Meter SMPS

Write a review

Note: HTML is not translated!
    Bad           Good