ATF1508AS-15QI100
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 100 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 80 |
| Memory Type | EEPROM |
| Propagation Delay | 15 ns |
| Frequency (Max) | 100MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 3000 |
| Number of Programmable I/O | 80 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| In-System Programmable | YES |
| Height Seated (Max) | 3.4mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATF1508AS-15QI100 Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the PQFPpackage, you will find it.As you can see, this device has 80 I/O ports programmed into it.The termination of a device is set to [0].Its terminal position is QUAD.It is powered from a supply voltage of 5V.The part is included in Programmable Logic Devices.In this chip, the 100pins are programmed.In digital circuits, there are 3000gates, which act as a basic building block.In order to achieve high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].Surface Mountis used to mount this electronic component.There are 100pins on it.A voltage of 5.5V is the maximum supply voltage for this device.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.A total of 80Programmable I/Os are present.It is recommended that the operating temperature exceeds -40°C.The operating temperature should be lower than 85°C.There should be a lower maximum frequency than 100MHz.A programmable logic type is categorized as EE PLD.
ATF1508AS-15QI100 Features
PQFP package
80 I/Os
100 pin count
100 pins
ATF1508AS-15QI100 Applications
There are a lot of Atmel (Microchip Technology) ATF1508AS-15QI100 CPLDs applications.
- Software-Driven Hardware Configuration
- DMA control
- Programmable polarity
- Address decoding
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Wide Vin Industrial low power SMPS
- Random logic replacement
- High speed graphics processing
- Handheld digital devices
- Power Meter SMPS
