banner_page

ATF1508AS-7AC100

0.5mm PMIC 100 Pin 5V TQFP


  • Manufacturer: Atmel (Microchip Technology)
  • Nocochips NO: 69-ATF1508AS-7AC100
  • Package: TQFP
  • Datasheet: -
  • Stock: 788
  • Description: 0.5mm PMIC 100 Pin 5V TQFP (Kg)

Details

Tags

Parameters
Memory Type EEPROM
Propagation Delay 7.5 ns
Frequency (Max) 166.7MHz
Programmable Logic Type EE PLD
Number of Gates 3000
Number of Programmable I/O 80
Number of Logic Blocks (LABs) 8
Speed Grade 7
Output Function MACROCELL
Number of Macro Cells 128
JTAG BST YES
In-System Programmable YES
Height Seated (Max) 1.2mm
Length 14mm
Width 14mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
JESD-609 Code e0
Pbfree Code no
Moisture Sensitivity Level (MSL) 3
Number of Terminations 100
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Subcategory Programmable Logic Devices
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Supply Voltage 5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 100
Operating Supply Voltage 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Number of I/O 80

ATF1508AS-7AC100 Overview


There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the TQFPpackage, you will find it.The device has 80inputs and outputs.There are 100 terminations programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.There is 5V voltage supply for this device.The part is included in Programmable Logic Devices.With 100pins programmed, the chip is ready to use.There are 3000 gates, which are devices that acts as a building block for digital circuits. For high efficiency, the supply voltage should be maintained at [0].Data is stored using [0].A Surface Mountis mounted on this electronic component.The device is designed with pins [0].In this case, the maximum supply voltage is 5.25V.It operates with the minimal supply voltage of 4.75V.A total of 80programmable I/Os are available.In order to operate properly, the operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.8logic blocks (LABs) make up this circuit.There should be a lower maximum frequency than 166.7MHz.In programmable logic, a type of logic can be categorized as EE PLD.

ATF1508AS-7AC100 Features


TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)

ATF1508AS-7AC100 Applications


There are a lot of Atmel (Microchip Technology) ATF1508AS-7AC100 CPLDs applications.

  • Programmable polarity
  • PULSE WIDTH MODULATION (PWM)
  • State machine control
  • Interface bridging
  • Power up sequencing
  • Multiple DIP Switch Replacement
  • DMA control
  • ON-CHIP OSCILLATOR CIRCUIT
  • Boolean function generators
  • I/O PORTS (MCU MODULE)

Write a review

Note: HTML is not translated!
    Bad           Good