banner_page

ATF1508ASL-25AI100

0.5mm PMIC 100 Pin 5V TQFP


  • Manufacturer: Atmel (Microchip Technology)
  • Nocochips NO: 69-ATF1508ASL-25AI100
  • Package: TQFP
  • Datasheet: -
  • Stock: 281
  • Description: 0.5mm PMIC 100 Pin 5V TQFP (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TQFP
Number of Pins 100
JESD-609 Code e0
Moisture Sensitivity Level (MSL) 3
Number of Terminations 100
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory Programmable Logic Devices
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Supply Voltage 5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 100
Operating Supply Voltage 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of I/O 80
Memory Type EEPROM
Propagation Delay 25 ns
Frequency (Max) 33.3MHz
Programmable Logic Type EE PLD
Number of Gates 3000
Number of Programmable I/O 80
Number of Logic Blocks (LABs) 8
Speed Grade 25
Output Function MACROCELL
Number of Macro Cells 128
JTAG BST YES
In-System Programmable YES
Height Seated (Max) 1.2mm
Length 14mm
Width 14mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Contains Lead

ATF1508ASL-25AI100 Overview


There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.TQFPis the package in which it resides.It is equipped with 80I/O ports.It is programmed to terminate devices at [0].This electrical part has a terminal position of QUADand is connected to the ground.A voltage of 5Vprovides power to the device.It is a part of family [0].There are 100 pins on the chip.In digital circuits, there are 3000gates, which act as a basic building block.Optimal efficiency requires a supply voltage of [0].Data is stored using [0].A Surface Mountis mounted on this electronic component.There are 100pins on it.A voltage of 5.5V is the maximum supply voltage for this device.Despite its minimal supply voltage of [0], it is capable of operating.There are 80 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. It is recommended that the operating temperature be higher than -40°C.There should be a temperature below 85°Cat the time of operation.The program consists of 8 logic blocks (LABs).It is recommended that the maximal frequency be less than 0.A programmable logic type is classified as EE PLD.

ATF1508ASL-25AI100 Features


TQFP package
80 I/Os
100 pin count
100 pins
8 logic blocks (LABs)

ATF1508ASL-25AI100 Applications


There are a lot of Atmel (Microchip Technology) ATF1508ASL-25AI100 CPLDs applications.

  • Power Meter SMPS
  • Code converters
  • White goods (Washing, Cold, Aircon ,...)
  • High speed graphics processing
  • Power up sequencing
  • I/O expansion
  • Programmable power management
  • Wide Vin Industrial low power SMPS
  • Complex programmable logic devices
  • USB Bus

Write a review

Note: HTML is not translated!
    Bad           Good