banner_page

ATF1508BE-7AU100

Tin PMIC ATF15xx Series ATF1508BE 100 Pin 210MHz 100-TQFP


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-ATF1508BE-7AU100
  • Package: 100-TQFP
  • Datasheet: PDF
  • Stock: 298
  • Description: Tin PMIC ATF15xx Series ATF1508BE 100 Pin 210MHz 100-TQFP (Kg)

Details

Tags

Parameters
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 100-TQFP
Number of Pins 100
Supplier Device Package 100-TQFP (14x14)
Operating Temperature -40°C~85°C TA
Packaging Tray
Published 1997
Series ATF15xx
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Frequency 210MHz
Base Part Number ATF1508BE
Operating Supply Voltage 1.8V
Programmable Type In System Programmable (min 10K program/erase cycles)
Max Supply Voltage 1.9V
Min Supply Voltage 1.7V
Number of I/O 80
Memory Type EEPROM
Propagation Delay 7 ns
Turn On Delay Time 7 ns
Number of Logic Elements/Cells 8
Max Frequency 210MHz
Number of Programmable I/O 80
Number of Logic Blocks (LABs) 8
Speed Grade 7
Number of Macro Cells 128
Voltage Supply - Internal 1.7V~1.9V
Delay Time tpd(1) Max 7ns
RoHS Status ROHS3 Compliant

ATF1508BE-7AU100 Overview


The mobile phone network has 128 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).It is part of the 100-TQFP package.In this case, there are 80 I/Os programmed.It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.It belongs to the ATF15xxseries of FPGAs.ATF1508BEcontains its related parts.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended to store data in [0].A Surface Mountis mounted on this electronic component.There are 100 pins embedded in the device.A voltage of 1.9V is the maximum supply voltage for this device.A minimum supply voltage of 1.7V is required for this device to operate.A total of 80programmable I/Os are available.It is possible to achieve a frequency of 210MHz.The maximum frequency should not exceed 210MHz.It is recommended that the operating temperature be higher than -40°C.A temperature less than 85°Cshould be used for operation.8logic blocks (LABs) make up this circuit.An elementary building block consists of 8logic elements/cells.

ATF1508BE-7AU100 Features


100-TQFP package
80 I/Os
The operating temperature of -40°C~85°C TA
100 pins
8 logic blocks (LABs)

ATF1508BE-7AU100 Applications


There are a lot of Microchip Technology ATF1508BE-7AU100 CPLDs applications.

  • POWER-SAVING MODES
  • Timing control
  • PULSE WIDTH MODULATION (PWM)
  • LED Lighting systems
  • I/O expansion
  • Software-Driven Hardware Configuration
  • DDC INTERFACE
  • Power up sequencing
  • Reset swapping
  • Custom state machines

Write a review

Note: HTML is not translated!
    Bad           Good