ATF22LV10CQZ-30JU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Packaging | Tube |
| Published | 2010 |
| Series | 22V10 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 28 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 33.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATF22LV10C |
| Number of Outputs | 10 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Number of I/O | 10 |
| Voltage - Input | 3.3V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 30 ns |
| Access Time | 30 ns |
| Architecture | PAL-TYPE |
| Number of Gates | 350 |
| Speed Grade | 30 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.572mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF22LV10CQZ-30JU Overview
Type Surface Mount mounting is used for mounting the PLD stock.There is one programmable type of PLD Programmable logic device?, EE PLD.A high performance-to-cost ratio makes 22V10 Series the best value on the market.Due to the 28-LCC (J-Lead)'s package, Programmable logic devices are widely used in the electronics industry.Programmable array logic's Packaging is made of Tube-materials.3.3V receives voltage as Programmable logic array's input.10 macro cells are always present.ATF22LV10C represents the largest part of the PLD stock.There is a Surface Mount-mount for the PLD.Pin number 28 remains the same for the Complex Programmable logic device.The 33.3MHz frequency can still be used precisely.85°C is the current maximum working temperature.When Programmable logic device is in Programmable logic device's operation, it should be warmer than -40°C.Using a 3V volt supply voltage is the only way for it to work.There is 5.5V supply voltage that can be used with Programmable logic controller.10 I/Os on it can be programmed.The Complex Programmable logic device is powered from a source of 3.3V at all times.The PLD has dedicated inputs for 11.It has a 28 termination.There is a Programmable Logic Devices subcategory for it.Supplies for the Programmable logic device are 3.3/5V. 132 is the number of product terms.There are numerous 10 outputs.An example of 350 gates can be found here.
ATF22LV10CQZ-30JU Features
Mounting type of Surface Mount
Input voltage of 3.3V
Maximum temperature of 85°C
10 I/Os
ATF22LV10CQZ-30JU Applications
There are a lot of Microchip Technology ATF22LV10CQZ-30JU PLDs (Programmable Logic Device) applications.
- high-performance microcomputer systems
- High-speed Devices
- Industrial
- Programmable Logic Devices
- Microcomputer systems
- High performance applications
- Highly complex logic
- Low power applications
- Electrically Devices
- Software
