ATF22LV10CQZ-30SU
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Packaging | Tube |
| Published | 2010 |
| Series | 22V10 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 33.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ATF22LV10C |
| Number of Outputs | 10 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Programmable Type | EE PLD |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Number of I/O | 10 |
| Voltage - Input | 3.3V |
| Nominal Supply Current | 19mA |
| Max Supply Current | 60mA |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 30 ns |
| Access Time | 30 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Number of Product Terms | 132 |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATF22LV10CQZ-30SU Overview
The PLD stock is mounted with Type Surface Mount screws.EE PLD is the programmable type of PLD Programmable logic device?.22V10 Series has the best performance-cost ratio available.This 24-SOIC (0.295, 7.50mm Width) package is widely used in the electronics industry.Programmable array logic's Packaging uses Tube-materials.3.3V receives the voltage input.In 10 macro cells, there is always something to do.There is a ATF22LV10C-shaped section on the PLD stock that is Programmable logic array's biggest part.Surface Mount is the direction in which the PLD is mounted.For the Complex Programmable logic device, 24 remains the pin number.The system can still function accurately at 33.3MHz frequency.Programmable logic devices are currently 85°C degrees Celsius that can be used as a maximum working temperature.The temperature should be higher than -40°C when Programmable logic devices are operating.Only 3V volts will work with Programmable logic controller.There is only one supply voltage that it can work with, 5.5V.10 I/Os can be programmed.The Complex Programmable logic device is powered from a source of 3.3V at all times.The 11 inputs are embedded into the PLD.This PLD is programmed with a 24 termination.You can apply it to the Programmable Logic Devices subcategory.The Programmable logic device is supplied by 3.3/5V.132' indicates how many product terms there are.The 10 outputs are numerous.As far as supply temperature is concerned, it can work with a maximum of 60mA.
ATF22LV10CQZ-30SU Features
Mounting type of Surface Mount
Input voltage of 3.3V
Maximum temperature of 85°C
10 I/Os
ATF22LV10CQZ-30SU Applications
There are a lot of Microchip Technology ATF22LV10CQZ-30SU PLDs (Programmable Logic Device) applications.
- Highly complex logic
- Programmable Logic Devices
- high-performance microcomputer systems
- Low power applications
- Power-limited applications
- Software
- High-end communication equipment
- Industrial
- Various types of power-limited applications
- Battery operated devices
