Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
24-DIP (0.300, 7.62mm) |
Number of Pins |
24 |
Packaging |
Tube |
Published |
1997 |
Series |
22V10 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
24 |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
DUAL |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Frequency |
166MHz |
Base Part Number |
ATF22V10C |
Number of Outputs |
10 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Programmable Type |
EE PLD |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Number of I/O |
10 |
Nominal Supply Current |
85mA |
Propagation Delay |
7.5 ns |
Turn On Delay Time |
7.5 ns |
Access Time |
7 ns |
Architecture |
PAL-TYPE |
Number of Gates |
500 |
Speed Grade |
7 |
Output Function |
MACROCELL |
Number of Macro Cells |
10 |
Number of Dedicated Inputs |
10 |
Number of Product Terms |
132 |
Height |
5.334mm |
Length |
32.13mm |
Width |
7.112mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ATF22V10C-7PX Overview
Type Through Hole mounts the PLD stock.Programmable logic devices are programmable type of PLD Programmable logic device? EE PLD.A high performance-to-cost ratio makes 22V10 Series the best value on the market.The 24-DIP (0.300, 7.62mm)'s package makes it widely used in electronics.A Tube-material can be used for Programmable array logic's Packaging.There are always macro cells in 10.In the PLD stock, ATF22V10C corresponds to the largest part.There is a Through Hole-mount for the PLD.Complex Programmable logic device 24 has the same pin number as before.At 166MHz frequency, Programmable logic devices are still capable of performing precisely.Currently, maximum working temperature is 70°C.In Programmable logic device's operation, it should be warmer than 0°C.A supply voltage of 4.75V volts is necessary for it to function.There is 5.25V supply voltage that can be used with Programmable logic controller.10 I/Os are programmable.The Complex Programmable logic device is powered from a source of 5V at all times.The 10 inputs are embedded into the PLD.In it, a 24 termination has been programmed.There can be a subcategory Programmable Logic Devices applied to it.Supplies 5V are used in the Programmable logic device.In this case, 132 refers to the number of product terms available.10 outputs are numerous.5V voltage is needed to operate it.Gates called 500 exist.
ATF22V10C-7PX Features
Mounting type of Through Hole
Maximum temperature of 70°C
10 I/Os
ATF22V10C-7PX Applications
There are a lot of Microchip Technology ATF22V10C-7PX PLDs (Programmable Logic Device) applications.
- Microcomputer systems
- High-end communication equipment
- Software
- High performance applications
- Electrically Devices
- Low power applications
- Power-limited applications
- Highly complex logic
- high-performance microcomputer systems
- High-speed Devices