banner_page

ATF2500C-10JC

5V 1.27mm PMIC 20 Pin 5V LCC


  • Manufacturer: Atmel (Microchip Technology)
  • Nocochips NO: 69-ATF2500C-10JC
  • Package: LCC
  • Datasheet: -
  • Stock: 381
  • Description: 5V 1.27mm PMIC 20 Pin 5V LCC (Kg)

Details

Tags

Parameters
JESD-30 Code S-PQCC-J44
Qualification Status Not Qualified
Operating Supply Voltage 3.6V
Supply Voltage-Max (Vsup) 5.25V
Power Supplies 5V
Temperature Grade COMMERCIAL
Number of I/O 24
Propagation Delay 10 ns
Frequency (Max) 52MHz
Programmable Logic Type EE PLD
Number of Gates 2500
Output Function MACROCELL
Number of Macro Cells 24
JTAG BST NO
Number of Dedicated Inputs 14
In-System Programmable NO
Height Seated (Max) 4.57mm
Length 16.5862mm
Width 16.5862mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mount Surface Mount
Package / Case LCC
Number of Pins 20
Packaging Bulk
JESD-609 Code e0
Moisture Sensitivity Level (MSL) 2
Number of Terminations 44
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature NO
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 225
Supply Voltage 5V
Terminal Pitch 1.27mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 44

ATF2500C-10JC Overview


This network has 24macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is contained in package [0].As you can see, this device has 24 I/O ports programmed into it.There are 44 terminations programmed into the device.QUADis the terminal position of this electrical part.Power is provided by a supply voltage of 5V volts.It is included in Programmable Logic Devices.Bulkshould be used for packaging the chip.There are 44 pins on the chip.It is also characterized by NO.A digital circuit can be constructed using 2500gates.High efficiency requires a voltage supply of [0].In this case, Surface Mountis used to mount the electronic component.It is designed with 20 pins.It runs on 5Vvolts of power.In this case, the maximum supply voltage (Vsup) is 5.25V.In order to operate, the temperature should be higher than 0°C.The operating temperature should be lower than 70°C.The status of input signals is detected by 14dedicated inputs.It is recommended that the maximum frequency be less than 52MHz.There are several types of programmable logic that can be categorized as EE PLD.

ATF2500C-10JC Features


LCC package
24 I/Os
44 pin count
20 pins
5V power supplies

ATF2500C-10JC Applications


There are a lot of Atmel (Microchip Technology) ATF2500C-10JC CPLDs applications.

  • SUPERVISORY FUNCTION (LVD AND WATCHDOG)
  • Battery operated portable devices
  • Dedicated input registers
  • Custom shift registers
  • Auxiliary Power Supply Isolated and Non-isolated
  • Storage Cards and Storage Racks
  • TIMERS/COUNTERS
  • Digital systems
  • Pattern recognition
  • Complex programmable logic devices

Write a review

Note: HTML is not translated!
    Bad           Good