Parameters |
Mount |
Surface Mount |
Package / Case |
J |
Number of Pins |
44 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Moisture Sensitivity Level (MSL) |
2 |
Number of Terminations |
44 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
NO |
HTS Code |
8542.31.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
225 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
44 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Number of I/O |
24 |
Memory Type |
EEPROM |
Propagation Delay |
15 ns |
Turn On Delay Time |
15 ns |
Frequency (Max) |
83MHz |
Programmable Logic Type |
EE PLD |
Number of Gates |
2500 |
Speed Grade |
15 |
Output Function |
MACROCELL |
Number of Macro Cells |
24 |
JTAG BST |
NO |
Number of Dedicated Inputs |
13 |
In-System Programmable |
NO |
Height Seated (Max) |
4.572mm |
Length |
16.586mm |
Width |
16.586mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
ATF2500C-15JC Overview
There are 24 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].In this case, there are 24 I/Os programmed.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 5V voltage supply for this device.It is a part of the family [0].In this chip, the 44pins are programmed.This device is also capable of displaying [0].2500gates are devices that serve as building blocks for digital circuits.In order to achieve high efficiency, the supply voltage should be maintained at [0].In order to store data, EEPROMis used.The electronic component is mounted by Surface Mount.There are 44 pins embedded in the device.There is a maximum supply voltage of 5.25V.A minimum supply voltage of 4.75V is required for this device to operate.A total of 5V power supplies are needed to run it.Ideally, the operating temperature should be greater than 0°C.The operating temperature should be lower than 70°C.The status of input signals is determined by 13dedicated inputs.It is recommended that the maximum frequency is less than 0.A programmable logic type is categorized as EE PLD.
ATF2500C-15JC Features
J package
24 I/Os
44 pin count
44 pins
5V power supplies
ATF2500C-15JC Applications
There are a lot of Atmel (Microchip Technology) ATF2500C-15JC CPLDs applications.
- I/O PORTS (MCU MODULE)
- POWER-SAVING MODES
- Programmable polarity
- Configurable Addressing of I/O Boards
- High speed graphics processing
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Battery operated portable devices
- ToR/Aggregation/Core Switch and Router
- Software-driven hardware configuration
- Handheld digital devices