ATF2500C-20JC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Supplier Device Package | 44-PLCC (16.6x16.6) |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | ATF2500C(L) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 71MHz |
| Base Part Number | ATF2500 |
| Operating Supply Voltage | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Operating Supply Current | 80mA |
| Number of I/O | 24 |
| Nominal Supply Current | 80mA |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Number of Gates | 2500 |
| Max Frequency | 71MHz |
| Number of Programmable I/O | 23 |
| Number of Macro Cells | 24 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 20ns |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATF2500C-20JC Overview
This network has 24macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).44-LCC (J-Lead)is the package in which it resides.There are 24 I/Os on the board.It is recommended that the chip be packaged by Tube.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is mounted in the way of Surface Mount.It belongs to the ATF2500C(L)series of FPGAs.The ATF2500shows its related parts.For digital circuits, there are 2500gates. These devices serve as building blocks.Optimal efficiency requires a supply voltage of [0].For data storage, EEPROMis adopted.Surface Mountmounts this electronic component.The pins are [0].This device operates at a voltage of 5.25V when the maximum supply voltage is applied.It is powered by 4.75Vas its minimum supply voltage.There are 23 programmable I/Os, which are method of data transmissions, via input/output (I/O), between a central processing unit (CPU) and a peripheral device, such as a network adapter or a Parallel ATA storage device. A frequency of 71MHzcan be achieved.There should be a lower maximum frequency than 71MHz.In order to operate properly, the operating temperature should be higher than 0°C.It is recommended to keep the operating temperature below 70°C.
ATF2500C-20JC Features
44-LCC (J-Lead) package
24 I/Os
The operating temperature of 0°C~70°C TA
44 pins
ATF2500C-20JC Applications
There are a lot of Microchip Technology ATF2500C-20JC CPLDs applications.
- Portable digital devices
- ON-CHIP OSCILLATOR CIRCUIT
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Custom state machines
- Custom shift registers
- D/T registers and latches
- Random logic replacement
- POWER-SAVING MODES
- TIMERS/COUNTERS
- Cross-Matrix Switch
