ATF2500C-20KM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-CLCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -55°C~125°C TC |
| Packaging | Tube |
| Published | 1997 |
| Series | ATF2500C(L) |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | TIN LEAD |
| Additional Feature | NO |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 71MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATF2500 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 24 |
| Memory Type | EEPROM |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 20 ns |
| Number of Gates | 2500 |
| Speed Grade | 20 |
| Output Function | MACROCELL |
| Number of Macro Cells | 24 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 13 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 4.57mm |
| Length | 16.63mm |
| Width | 16.63mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATF2500C-20KM Overview
In the mobile phone network, there are 24macro cells, which are cells with high-power antennas and towers.The product is contained in a 44-CLCC (J-Lead) package.It is programmed with 24 I/Os.There are 44 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power source is powered by 5Vvolts.There is a part in the family [0].Package the chip by Tube.Due to its reliability, it is operated at a temperature of [0].It is recommended that Surface Mountholds the chip in place.This type of FPGA is a part of the ATF2500C(L) series.This device can also display [0].The ATF2500indicates that its related parts can be found.A digital circuit can be constructed using 2500gates.High efficiency requires the supply voltage to be maintained at [0].In order to store data, EEPROMis used.Surface Mountis the mounting point of this electronic part.The device is designed with pins [0].There is a maximum supply voltage of 5.5Vwhen the device is operating.A minimum supply voltage of 4.5V is required for it to operate.A total of 5V power supplies are needed to run it.There is 71MHz frequency that can be achieved.A total of 13dedicated inputs are available for the purpose of detecting input signals.
ATF2500C-20KM Features
44-CLCC (J-Lead) package
24 I/Os
The operating temperature of -55°C~125°C TC
44 pins
5V power supplies
ATF2500C-20KM Applications
There are a lot of Microchip Technology ATF2500C-20KM CPLDs applications.
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Multiple DIP Switch Replacement
- Multiple Clock Source Selection
- Digital multiplexers
- Parity generators
- Custom shift registers
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Software-Driven Hardware Configuration
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Interface bridging
