banner_page

ATF750C-10JC

5V 1.27mm PMIC 28 Pin 90MHz 5V J


  • Manufacturer: Atmel (Microchip Technology)
  • Nocochips NO: 69-ATF750C-10JC
  • Package: J
  • Datasheet: -
  • Stock: 522
  • Description: 5V 1.27mm PMIC 28 Pin 90MHz 5V J (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case J
Number of Pins 28
JESD-609 Code e0
Moisture Sensitivity Level (MSL) 2
Number of Terminations 28
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature NO
HTS Code 8542.39.00.01
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Peak Reflow Temperature (Cel) 225
Supply Voltage 5V
Terminal Pitch 1.27mm
Frequency 90MHz
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 28
Qualification Status Not Qualified
Operating Supply Voltage 5V
Power Supplies 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Number of I/O 10
Memory Type EEPROM
Propagation Delay 10 ns
Frequency (Max) 90MHz
Programmable Logic Type EE PLD
Number of Gates 750
Output Function MACROCELL
Number of Macro Cells 10
JTAG BST NO
Number of Dedicated Inputs 11
In-System Programmable NO
Height Seated (Max) 4.572mm
Length 11.5062mm
Width 11.5062mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

ATF750C-10JC Overview


This network has 10macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with J.This device has 10 I/O ports programmed into it.There are 28 terminations programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.A voltage of 5V is used as the power supply for this device.There is a part in the family [0].There are 28 pins on the chip.It is also characterized by NO.In digital circuits, 750gates serve as building blocks.High efficiency requires a voltage supply of [0].For storing data, it is recommended to use [0].In this case, it is mounted by Surface Mount.The 28pins are designed into the board.It operates at a maximum supply voltage of 5.25V volts.The device is designed to operate with a minimal supply voltage of 4.75VV.A power supply of 5Vis required to operate it.It is possible to achieve a frequency of 90MHz.It is recommended that the operating temperature be greater than 0°C.It is recommended that the operating temperature be below 70°C.It has 11dedicated inputs for detecting input signals.The maximum frequency should not exceed 90MHz.Programmable logic types can be divided into EE PLD.

ATF750C-10JC Features


J package
10 I/Os
28 pin count
28 pins
5V power supplies

ATF750C-10JC Applications


There are a lot of Atmel (Microchip Technology) ATF750C-10JC CPLDs applications.

  • Page register
  • PLC analog input modules
  • High speed graphics processing
  • Field programmable gate
  • Interface bridging
  • Address decoders
  • Address decoding
  • I/O PORTS (MCU MODULE)
  • D/T registers and latches
  • TIMERS/COUNTERS

Write a review

Note: HTML is not translated!
    Bad           Good