ATF750C-10NM/883
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-CLCC |
| Number of Pins | 28 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | ATF750C(L) |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Additional Feature | NO |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 90MHz |
| Base Part Number | ATF750 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 750 |
| Screening Level | MIL-STD-883 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 2.54mm |
| Length | 11.43mm |
| Width | 11.43mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
ATF750C-10NM/883 Overview
There are 10 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].There are 10 I/Os on the board.The device is programmed with 28 terminations.The terminal position of this electrical component is QUAD.A voltage of 5V is used as the power supply for this device.There is a part in the family [0].As a result, it is packaged as Tube.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.In FPGA terms, it is a type of ATF750C(L)series FPGA.The device can also be used to find [0].In accordance with the [0], its related parts are listed.A digital circuit can be constructed using 750gates.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended that data be stored in [0].The electronic component is mounted by Surface Mount.It is designed with 28 pins.This device operates at a voltage of 5.5Vas its maximum supply voltage.With a minimal supply voltage of [0], it operates.It runs on a voltage of 5Vvolts.In this case, 90MHzis the frequency that can be achieved.The status of input signals is detected by 11dedicated inputs.
ATF750C-10NM/883 Features
28-CLCC package
10 I/Os
The operating temperature of -55°C~125°C TA
28 pins
5V power supplies
ATF750C-10NM/883 Applications
There are a lot of Microchip Technology ATF750C-10NM/883 CPLDs applications.
- Battery operated portable devices
- LED Lighting systems
- D/T registers and latches
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Software-driven hardware configuration
- TIMERS/COUNTERS
- Preset swapping
- Power up sequencing
- Software-Driven Hardware Configuration
- POWER-SAVING MODES
