Parameters |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
24 |
JESD-609 Code |
e0 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
24 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Additional Feature |
NO |
HTS Code |
8542.39.00.01 |
Subcategory |
Programmable Logic Devices |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
225 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Frequency |
90MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
24 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Number of I/O |
10 |
Memory Type |
EEPROM |
Propagation Delay |
10 ns |
Frequency (Max) |
90MHz |
Programmable Logic Type |
EE PLD |
Number of Gates |
750 |
Output Function |
MACROCELL |
Number of Macro Cells |
10 |
JTAG BST |
NO |
Number of Dedicated Inputs |
11 |
In-System Programmable |
NO |
Height Seated (Max) |
5.334mm |
Length |
31.877mm |
Width |
7.62mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
ATF750C-10PC Overview
There are 10 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.It is contained in package [0].As a result, it has 10 I/O ports programmed.It is programmed to terminate devices at [0].This electrical component has a terminal position of 0.A voltage of 5V is used as the power supply for this device.This part is in the family [0].A chip with 24pins is programmed.If you use this device, you will also find [0].As a building block for digital circuits, there are 750gates.High efficiency requires the supply voltage to be maintained at [0].EEPROM is adopted for storing data.It is mounted by Through Hole.A total of 24pins are provided on this board.A maximum voltage of 5.25Vis required for operation.The device is designed to operate with a minimal supply voltage of 4.75VV.It operates from 5V power supplies.There is a maximum frequency of 90MHz.The operating temperature should be higher than 0°C.Temperatures should be lower than 70°C when operating.There are 11 dedicated inputs used to detect the status of input signals.There should be a lower maximum frequency than 90MHz.A programmable logic type is classified as EE PLD.
ATF750C-10PC Features
PDIP package
10 I/Os
24 pin count
24 pins
5V power supplies
ATF750C-10PC Applications
There are a lot of Atmel (Microchip Technology) ATF750C-10PC CPLDs applications.
- Cross-Matrix Switch
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- I/O expansion
- PULSE WIDTH MODULATION (PWM)
- Page register
- USB Bus
- PLC analog input modules
- State machine design
- Wide Vin Industrial low power SMPS
- Random logic replacement