ATF750C-10PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 24 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | NO |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 10 |
| Memory Type | EEPROM |
| Frequency (Max) | 90MHz |
| Programmable Logic Type | EE PLD |
| Number of Gates | 750 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 11 |
| In-System Programmable | NO |
| Height Seated (Max) | 5.334mm |
| Length | 31.877mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATF750C-10PI Overview
There are 10 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the DIPpackage, you will find it.There are 10 I/Os on the board.Terminations of devices are set to [0].This electrical part has a terminal position of DUALand is connected to the ground.The power supply voltage is 5V.This part is included in Programmable Logic Devices.There are 24 pins on the chip.It is also characterized by NO.A digital circuit can be constructed using 750gates.Optimal efficiency requires a supply voltage of [0].In this case, EEPROMwill be used to store the data.Through Holeis used to mount this electronic component.The device has a pinout of [0].A maximum supply voltage of 5.5Vis used in its operation.The device is designed to operate with a minimal supply voltage of 4.5VV.The system runs on a power supply of 5V watts.In order to operate properly, the operating temperature should be higher than -40°C.The operating temperature should be lower than 85°C.There are 11 dedicated inputs used to detect the status of input signals.The maximal frequency should be lower than 90MHz.There are several types of programmable logic that can be categorized as EE PLD.
ATF750C-10PI Features
DIP package
10 I/Os
24 pin count
24 pins
5V power supplies
ATF750C-10PI Applications
There are a lot of Atmel (Microchip Technology) ATF750C-10PI CPLDs applications.
- Voltage level translation
- Boolean function generators
- Portable digital devices
- Cross-Matrix Switch
- Power up sequencing
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Power Meter SMPS
- Preset swapping
- D/T registers and latches
- Configurable Addressing of I/O Boards
